Machine Kinematics
solved, then drawn
Concept

Carrier — where it appears

The body holding two meshing gears' axes a fixed distance apart, relative to which their rolling relation is written. Writing a planetary's relation from the carrier's point of view is what turns it into an ordinary train, which is the whole content of the classical tabular method.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

A simple planetary, as a graph. Members are vertices and meshes are edges. Each edge carries the two tooth counts and the body the two axes are stationary in — its carrier — and that third label is the whole of what makes an epicyclic different from an ordinary train. Write the mesh relation relative to the carrier and one formula covers both: an ordinary train is the case where every carrier is the frame. This train has 2 meshes across 5 members and 2 freedoms.

A ratio is a null space

Write a gear train as a graph — bodies for vertices, meshes for edges, and on every edge the body the two axes are stationary in — and one formula covers a countershaft gearbox, a planetary, a harmonic drive and a car's differential. The ratio is the null space of a matrix whose entries are tooth counts, so it comes out as a fraction and not as a number that is nearly one.

transmission · Transmission The lever of a simple planetary. Each member sits at a position on the lever fixed by the tooth counts alone, and its speed is the height of one straight line over that position. The line here is drawn through sun and ring; every other member is plotted where the train's null space puts it, and lands on the line exactly — the residual is zero in rationals, and 2.2e-16 once the coordinates have been rounded to doubles for the drawing. Where the line crosses the axis is the member that is standing still, and that is what a brake does: it pins the line to the axis at one position and leaves it free to pivot there. The planets are on the lever too, off the end of it, which is where they belong — they are members of the train and are not shafts anybody can reach.

The lever that is the gearset

The lever diagram of an epicyclic is usually offered as a mnemonic. It is exact, and the reason is a fact about the null space: a gearset whose frame carries no teeth can turn as a block, and that one motion supplies the coordinate every member is plotted at. Where the line crosses the axis is the member standing still, and the ordering of the members on the lever settles which gears are reductions and which run backwards, without a formula anywhere.

transmission · Transmission

Named alongside it

The objects these essays reach for when they reach for this one.

EpicyclicExact arithmeticMobilityNull spaceTransmission relationTwo-degree of freedomVelocity ratioLever analogyMeshRankSuperpositionWillis equation

All concepts