Machine Kinematics
solved, then drawn
Concept

Conflict graph — where it appears

One node per link and one edge per pair that cannot share a plane, half the edges read off the chain's joints and half measured over a drive. It has no dimensions and no units, and two mechanisms with different lengths and the same conflicts have the same graph.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

crank rocker: the closest pair at one position. The site's standard four-bar: ground 4, crank 1, coupler 3.5, rocker 3. Every joint is where the solver put it, exactly as in the linkage field; the material is the only thing added. The heavy segment joins the two closest points over every pair of parts that is tested — which excludes pairs sharing a pin, since their material surrounds that pin by construction — and its length is the gap: 0.5438 here, between coupler · frame. A negative value is a penetration depth, the distance the pair would have to be moved apart, and it is drawn in the warning colour.

Two bars that have to cross

The site's own four-bar has its coupler inside its frame by a full link width for the whole of a turn. It is not an impossible mechanism; it is a mechanism that cannot be built in one plane — and the plane it has been drawn in for twenty-three fields was a convenience nobody had to pay for.

bodies · Body A colouring is not an assignment. A pin joining links in planes 1 and 3 has to pass through plane 2, and anything in plane 2 whose material covers that pin is pierced by it. That condition involves three links at once where a colouring's conditions involve two, and it is invisible to a colouring because permuting colours preserves a colouring and destroys betweenness. It does not change the number of planes on any machine here. What it removes is arrangements: of the 6 three-plane colourings of a crank rocker, 2 can be built, and of Peaucellier's 192 exactly 96 can.

A plane is a colour

Assigning links to parallel planes so that no two conflicting parts share one is a graph colouring, and the answer for a four-bar is three. Then the pins have to get through, and the problem stops being a colouring: of the six proper three-plane colourings, two can be built.

bodies · Body A 4-stage scissor, open and as flat as it goes. On paper a scissor stack's height is n·L·sin φ and goes to nothing as the bars lie down. The bars are made of something: the two colours are the two planes the stack needs — two, at any number of stages, which is why a scissor folds at all — and the bars that share a plane are the ones two stages apart. They meet at φ = 0.0951, leaving each stage 0.0949 high, which is exactly the two bosses that touch: 2 × 0.0473. The stowed height of the whole stack is 0.380 rather than zero, and it grows with the stage count in the way a stowed lift's does.

A stack that has to fit

A scissor stack's height is n·L·sin φ and goes to nothing as the bars lie down — on paper. The bars are made of something, and what stops the fold is two bosses meeting: every stage keeps 0.0949 whatever the stack does, which is exactly twice the boss radius.

networks · Network

Named alongside it

The objects these essays reach for when they reach for this one.

Layer assignmentLink bodyBossChromatic numberInterferenceKinematic chainStowed heightBearing pedestalDeployableEnumerationFlat stateLower pair

All concepts