feature-part

Where a length comes from — the feature part generator

$Where a length comes from. A coupler 3.5 units long is a part with two holes in it, and neither hole's position is the length. Each carries an error of 0.010, of which 60% is common to both because they were bored in one setup — the whole pattern shifts by that much and the distance between the holes does not change. What survives is the independent part, 0.0063 at each hole, combining to 0.0089 on the length. A drawing that tolerances the length at ±0.010 is describing a part nobody makes, and it is out by a factor of 0.894 — optimistic below a shared fraction of one half and pessimistic above it.$

A coupler 3.5 units long is a part with two holes in it, and neither hole's position is the length. Each carries an error of 0.010, of which 60% is common to both because they were bored in one setup — the whole pattern shifts by that much and the distance between the holes does not change. What survives is the independent part, 0.0063 at each hole, combining to 0.0089 on the length. A drawing that tolerances the length at ±0.010 is describing a part nobody makes, and it is out by a factor of 0.894 — optimistic below a shared fraction of one half and pessimistic above it.

The dimensions as the unknownwide

Where it is used

A body is all size Links with a width
Where a length comes from Numbers that were measured
Where the two analyses cross Numbers that were measured
The same part, dimensioned twice Numbers that were measured
Which feature to hold tight Numbers that were measured

All 104 generators

All essays Fields Threads Ladders The mechanism ledger Refutations Concepts Search