The Sarrus linkage at 0°

Two three-joint chains in perpendicular planes, joining a fixed plate to a moving one. The left chain's three axes are all parallel, so it allows the plate to move in its plane; the right chain's are parallel to a perpendicular direction and allow the plate to move in that one. What both permit is a straight line, and only a straight line. Six revolute joints in a single loop: Kutzbach says 0 degrees of freedom, the screw system has rank 5 and says 1, and the plate rises. Measured over 24 positions, its tilt never exceeds 2.5e-14 radians and it never leaves the axis by more than 6.8e-14 — exact, from pin joints, with no approximation anywhere in it.