Depth

Series — page 2

A field says what an essay is about. A series follows one idea essay by essay — from the question that introduces it to the one that assumes all the others.

One, two, sixteen, two hundred and thirty. Every planar chain of mobility one, up to ten links, counted by enumeration rather than quoted. The pins column is forced: a chain of 10 links has one degree of freedom only if it has exactly (3n − 4)/2 pins, which is why no odd link count appears. Pass the count is how many graphs satisfy Grübler's rule, are connected, are simple and give every link at least two pins. Are chains is how many of those survive the fourth condition, that no proper subchain is already a structure — and the gap between the two columns is the whole of this field's first argument: at ten links 1,878 graphs pass a rule that 230 of them deserve. Mechanisms is larger again, because a chain is not a mechanism until a link is held still, and how many different mechanisms that gives is a question about the chain's own symmetry.

Topology

1 The mechanism is the graph
2 Same links, same pins, different machines
2 What a count cannot see
3 Right until the size nobody checked
3 Deciding that two chains are one
+11 more

16 essays · topology

A bevel differential, turning. cage in, hold left, with every member's speed taken from the train's null space and every angular position that speed integrated. The teeth are marked at the pitch points rather than cut as involutes — the flank is the teeth field's subject — but the count is the tooth count and the positions are the solved ones, so what turns and how fast is real. Drag it and watch which way each member goes: left 0.000 · right 2.000 · cage 1.000.

Transmission

1 Two inputs and one output
2 A ratio is a null space
2 The lever that is the gearset
3 Holding a member chooses the ratio
3 Four speeds from two numbers
+11 more

16 essays · transmission

Six assemblies, one routine, three disagreements and one accident. Every row is the same three steps: write down the constraint Jacobian, take its rank, and subtract it from the number of unknowns. The representations differ — bars between points, bodies joined by pins, panels joined by creases, one cell of a pattern that repeats for ever — and the routine does not. The counted column is the arithmetic on the numbers of bodies and joints; the measured column is the nullity of the matrix. They agree on the lazy tong and on the kagome cell and disagree on the other four, most sharply on the deployable ring, which the count declares immobile and which is sold as a mechanism that opens. The right-hand column is the reason: constraints that repeat what another constraint has already said, which the count has no way of seeing and the rank cannot help seeing. The fourth row is worth reading twice: the count says nothing can move and nothing can, so the two agree — and they agree for the wrong reason, because that pattern's flat state shows four freedoms and not one of them is a motion.

Network

1 Many loops, one freedom
2 The loops are in the graph
2 Each one moves, and together they do not
3 The freedom that survives repetition
3 Every vertex is a spherical linkage
+10 more

15 essays · networks

Six surfaces, six groups, six pairs. The six lower pairs, drawn as the surfaces they are. A lower pair is two bodies touching over a surface rather than at a point or along a line, and that is the same thing as saying the surface slides on itself — so what the joint permits is the surface's own symmetry group. Each caption is computed from the surface's normals and not from the pair's name: a plane gives three freedoms and planar motion, a sphere gives three and spherical motion, a plain cylinder gives two, a shaft with collars gives one rotation, a prism gives one translation, and a thread gives one screw whose pitch comes back as the thread's own lead. Eleven surfaces were tried and six groups came out, which is where the number in every textbook's table comes from.

Pair

1 A joint is a surface that slides on itself
2 Six, and no others
2 The count cannot tell a pin from a slide
3 Twelve kinds of freedom
3 Almost nothing is a group
+10 more

15 essays · pairs

Seven arrangements, one routine, and the two that hold. Every row is the same three steps: write down one row per contact — the moment of its normal about the origin, then the normal itself — take the convex hull of those rows, and ask whether the origin is inside it. The parts differ, the numbers of contacts differ, and the routine does not. Two of the seven hold. The other five leave the part something, and the interesting column is what: four rays of rotation for the pinwheel, a translation straight out of the vee, and for the last two a whole line rather than any number of rays, which is what a rank below three means and is the case a reader has to be warned about. Note that the four contacts of the second row are the four of the first row, on the same four edges of the same square, at the same distance along each. positioned by solving, not by drawing.

Restraint

1 A constraint that only pushes
2 What one contact forbids
2 Four in the plane and seven in space
3 The test is a program, not a rank
3 The escape is a place
+9 more

14 essays · holding

A pin in a hole is a short link. Left: a pin of radius 0.86 in a hole of radius 1, so the clearance is 0.14. The pin's centre may sit anywhere within that of the hole's centre. Right: the same joint as it enters the kinematics — a binary link of fixed length 0.14 and free direction, with a revolute at each end. That is not an analogy. It is the same set of relative positions, so every count, every Jacobian and every solve on this site applies to it unchanged, and a four-bar with play at each pin is a mechanism with eight links and eight joints.

Clearance

1 A clearance is a link
2 How far the crank turns first
3 Which pin to buy
4 Taking up the play
5 The pair a catalogue sells

5 essays · practice

The same error, twice, in two directions. A Sarrus linkage with one axis of one chain tilted off true, and the motion range that survives. Tilted within the plane the chain works in, it does not care: at 0.2 radians — eleven and a half degrees, which is not a manufacturing error by any standard — it still drives through a full turn. Tilted out of that plane, 0.001 radians stops it dead. Two hundred times the error, in the other direction, for no cost at all. What separates them is whether the perturbation lies in the screw system the mechanism leaves unconstrained — so "an overconstrained mechanism must be exact" is not merely crude, it is wrong about the case it is usually said of.

Overconstraint

1 Fragility has a direction
2 Why a hinge works
3 A piano hinge is not forty door hinges

3 essays · practice

The transmission angle through one turn. μ is the angle at B between coupler and rocker, computed from each solved position rather than from a formula. It runs from 54.3° to 100.3° for these lengths. The shaded band is the usual design rule — keep μ between 40° and 140° — and this linkage stays inside it throughout. The rule is about geometry alone: nothing here knows about friction, and a mechanism with a comfortable μ can still be a poor machine.

Practice

1 What is still outside
2 Where the boundary moved
3 Where the boundary moved again

3 essays · practice