Machine Kinematics
solved, then drawn
Concept

Burmester point — where it appears

A point of a moving plane whose path holds one circle to fifth order, of which a planar motion has at most four. There are two or none at most positions rather than always four, and how many there are changes as the crank turns, which is measured here rather than assumed.

Named by 5 essays across 3 fields — each of them below, with the objects they name alongside it.

Five positions, and what is left of the curve. Five prescribed poses of a moving body. With four of them, every point of the pale curve is a usable fixed pivot — a one-parameter family. The fifth pose is one more equation, and it leaves 4 points. Bézout's number for the system is 16; 4 paths arrive; 4 of those are real. Every pair of the 4 is a four-bar, so there are 6 candidate linkages and 2 of them reach all five poses in one piece and in order. 1 of the 4 pivots is too far away to draw in frame and is marked at the edge with its true distance — which is why some of the linkages have a bar twenty times the size of the body.

Five positions, and what is left

Three prescribed poses leave a whole plane of choices. Four leave a curve. Five leave four points, and finding them is the first thing in this site's synthesis field that a compass cannot do — it needs two cubics intersected, which is algebra rather than construction. Four points give six four-bars, and two of them can be built.

synthesis · Synthesis A catalogue is a search space, and a requirement is a filter on it. What a census is for. Four requirements applied in turn to the 230 ten-link chains, each of them a statement about the graph alone: a link carrying four pins, a link none of whose neighbours is binary, and a way of driving it that comes apart into dyads. 26 chains survive all of them. None of this is dimensional synthesis and none of it can be — no requirement here mentions a length, an angle or a position, and every one of them can be checked before a single dimension is chosen. That is the argument for having the census at all: the design problem is a search over shapes within a topology, and knowing which topologies there are turns an open question into 26 closed ones.

Choosing the chain before the lengths

Every synthesis method on this site starts by assuming a topology, and the assumption is usually a habit. What the graph fixes before any dimension is chosen is the number of free parameters — two per pin less four — and therefore how many positions can be prescribed at all.

synthesis · Synthesis Two Burmester points, or none, depending where the crank is. A Burmester point's path stays on one circle to fifth order. A planar motion has at most four of them; two of this mechanism's are always its own moving pins, whose paths are exact circles and satisfy every order at once. The other two are real for 67 per cent of the turn and complex for the rest, and the count changes without anything about the mechanism changing. The window matters and is stated: points beyond a hundred coupler lengths from the pole are not counted, and widening the window from six to four hundred moves the count of positions-with-two from 191 to 245 out of 360. A silent cap here would read as an absence.

The circle a point stays on longest

One condition further on are the points whose path holds a circle to fifth order. A planar motion has at most four; two of them are always the mechanism's own pins, and the other two are real for two thirds of a turn and complex for the rest — a count that changes while nothing about the mechanism does.

curvature · Curvature Three points, three orders of contact. Replace the coupler point by a crank pivoting at the centre of its path's osculating circle, drive the linkage away from the instant, and measure how far the point gets from that circle. The distance grows like a power of the step, and the power is the number of derivatives that agreed. An ordinary point gives 3.00; a point of the cubic of stationary curvature gives 3.94; a Burmester point, where the curvature is stationary and its rate of change is too, gives 4.97. Nothing in the measurement knows which kind of point it was handed. This is what the two special curves are for: they are where a single pivot can replace a whole linkage for longest. positioned by solving, not by drawing.

How long a pivot stands in for a linkage

Throw the four-bar away and replace a coupler point by a crank pivoting at the centre of its path's curvature. The two separate like the cube of the crank step for an ordinary point, the fourth power on the cubic, and the fifth at a Burmester point — three exponents that are the whole field, measured with no derivative anywhere in the measurement.

curvature · Curvature A dwell six-bar built on the vertex of a symmetric coupler curve. The four-bar with ground 3, crank 1, and coupler, rocker and arm all 2.5, with the angle at the rocker pin set to 120.8024°, so that its coupler curve is its own mirror image about the dashed line. The curve crosses that line at crank angle 0°, and a link of the osculating radius there, 5.7691, runs from the tracing point to a pin at the centre of curvature; an output link of 3 from a third ground pivot holds that pin, square to the dwell link at the vertex. Faintly, the dwell link and output 50° of crank either side. The output swings 7.43° over a whole turn, and near the vertex its angle changes only at sixth order in the crank's.

The flattest dwell is not the longest

A coupler curve that is its own mirror image has no odd terms in its distance from a circle centred on the mirror line, so one angle of the coupler can remove the fourth-order term and leave a dwell of sixth order, with no search of the curve. A six-bar built there dwells for 58.7° of crank inside 0.1% of its swing. Turned two degrees away from that angle it dwells for 80.1°, and the searched six-bar for 24.4°.

curves · Coupler

Named alongside it

The objects these essays reach for when they reach for this one.

Osculating circlePath curvatureContact orderCubic of stationary curvatureAssur groupBall pointBezoutBranch defectBurmester theoryCanonical formCentre-point curveCircle-point curve

All concepts