Machine Kinematics
solved, then drawn
Concept

Eccentricity — where it appears

The offset between two axes that turns a rotation into an orbit. In a rotary engine and a cycloidal reducer alike it is the lobe depth as well as the offset, so choosing one chooses the other.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

A rotor that was not drawn, at 52° of shaft. The housing is an epitrochoid — the only shape here that was written down — and the rotor is the envelope of it, seen from a body that turns at a third of the shaft's rate about a centre orbiting at the eccentricity. Nothing about the rotor was chosen. Its three apexes come out at radius 100.000000, which is the generating radius R exactly, at 0° and ±120°; the middle of each flank comes closest to the centre at 72.0000, which is R − 2e. The apexes are the only part of the rotor that touches the housing, which is why a rotary engine's sealing problem is three lines rather than a ring. positioned by solving, not by drawing.

A rotor nobody drew

The rotor of a rotary engine has three corners, three flanks and one job: to stay in contact with a housing while turning at a third of the shaft's speed about a centre that orbits. Given the housing and that motion, the rotor is not designed. It is computed, corners and all, by the routine that cuts a gear tooth.

meshing · Meshing Three chambers, 15,257 mm² between them. Each chamber is bounded by one flank of the rotor and the arc of housing between the two apexes that seal it, so its area is a polygon integral over two curves that are both known exactly. At this shaft angle they are 6309, 1147, 7801 mm². They add to 15257, and the housing's area less the rotor's is 15258 — a number that cannot depend on where the rotor is, and does not, to 9.2e-6 of itself. The engine's displacement is that constant shared out differently, and the three chambers are one chamber counted at three phases of the same cycle. positioned by solving, not by drawing.

Three chambers and a constant

A rotor with three corners divides its housing into three chambers, and as the shaft turns they trade area: one grows exactly as fast as the other two shrink. The total does not move — and the fact that it does not is a measurement of whether the corners are actually touching the wall.

meshing · Meshing Eleven lobes from twelve pins, at 46° of eccentric. The pins are circles and the disc is their envelope. One turn of the eccentric moves the disc back by one lobe pitch — a reduction of 11 : 1 from a ring, a disc and an offset bearing, with no gear teeth anywhere — and the profile's 11 lobes are counted off the generated curve rather than put there. The roots sit at 50.00 mm and the tips at 60.00, which are R − r ∓ e: the eccentricity is the lobe height, twice over. positioned by solving, not by drawing.

Eleven lobes from twelve pins

A ring of round pins, a disc on an eccentric, and a reduction of eleven to one with no gear teeth anywhere. The disc's profile is not designed: one pin generates one lobe of it, the other ten lobes are the same curve, and the count that decides the ratio is a count of lobes on a shape nobody drew.

meshing · Meshing

Named alongside it

The objects these essays reach for when they reach for this one.

Conjugate-actionEnvelopeMeshing equationApexEpitrochoidRotorBacklashCompression ratioContact pointCuspCycloidal driveDimensionless ratio

All concepts