Machine Kinematics
solved, then drawn
Concept

Kinematic geometry — where it appears

The study of a planar motion near an instant, described by a moving plane's derivatives rather than by the mechanism that produced it. Its objects — the pole, the inflection circle, the cubic of stationary curvature — belong to the motion, so two mechanisms with the same numbers are interchangeable to that order.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

The coupler's motion at 66°. Every point drawn as a stub is a point of the coupler's own plane, and the stub is that point's velocity — solved, not sketched. They all point different ways and they are all consistent with one statement: at this instant the whole plane is turning about a single point, the pole, marked with a cross. It is off this frame at 1.5 coupler lengths from the crank pin, which happens whenever the coupler is close to translating. The arrow through it is the pole's own velocity, which is a quantity about the motion rather than about any point of it, and half of everything in this field follows from its direction and its size. positioned by solving, not by drawing.

The mechanism drops out

Every other field here is about a machine. This one is about the motion a machine makes — a plane sliding over a plane — and near any instant that motion is a handful of numbers with no linkage in them. Two mechanisms that agree on those numbers make the same motion, and one of them can always be thrown away.

curvature · Curvature Two Burmester points, or none, depending where the crank is. A Burmester point's path stays on one circle to fifth order. A planar motion has at most four of them; two of this mechanism's are always its own moving pins, whose paths are exact circles and satisfy every order at once. The other two are real for 67 per cent of the turn and complex for the rest, and the count changes without anything about the mechanism changing. The window matters and is stated: points beyond a hundred coupler lengths from the pole are not counted, and widening the window from six to four hundred moves the count of positions-with-two from 191 to 245 out of 360. A silent cap here would read as an absence.

The circle a point stays on longest

One condition further on are the points whose path holds a circle to fifth order. A planar motion has at most four; two of them are always the mechanism's own pins, and the other two are real for two thirds of a turn and complex for the rest — a count that changes while nothing about the mechanism does.

curvature · Curvature The two curves the pole rolls along, at 60°. The pole is a different point at every instant, and it traces one curve in the fixed plane and another in the moving one. Those are the centrodes, and the whole motion is the second rolling without slipping on the first — a statement with no mechanism in it, which is why two completely different linkages with the same centrodes produce the same motion. The moving centrode is drawn here in the position it occupies at this instant, and it touches the fixed one at the pole to 0.0e+0 of a unit. positioned by solving, not by drawing.

The linkage, put back from two curves

This field opened by saying the mechanism drops out, and that every planar motion is one curve rolling on another. Both are true and neither had been measured. The rolling reproduces the four-bar's own placement to a residual that quarters when the sampling halves, and the two curves lay equal arc to a part in a billion.

curvature · Curvature

Named alongside it

The objects these essays reach for when they reach for this one.

Moving planeCentrodeFinite differencePath curvatureBurmester pointBurmester theoryClosed formConstraint jacobianContact orderCubic of stationary curvatureEnumerationInstant centre

All concepts