Machine Kinematics
solved, then drawn
Concept

Lift — where it appears

How far a cam or a valve has moved from its rest position, measured along the direction the follower is constrained to. It is what a cam is specified by, and everything else about the cam — its pressure angle, its accelerations, its smallest workable base circle — is a consequence of the lift law chosen.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

A flat follower needs a face, and how wide is not a matter of taste. The cam profile the cycloidal programme produces on a base circle of 30, at 70° of rotation, with the follower's face across the top and the contact marked. The contact is not on the follower's axis: it sits at ds/dθ from it, so it wanders sideways as the cam turns and the face has to reach from the most negative value of that to the most positive. Here that is 19.099 — measured off the drawn profile as 19.099, the two routes agreeing to 1.0e-16. A face cut to the lift, or to the base circle, or to whatever looked right, is a face the cam runs off.

A follower needs a face

A flat-faced follower does not touch the cam on its own axis. The contact wanders sideways as the cam turns, by exactly ds/dθ, and a face cut to the lift or to the base circle or to whatever looked right is a face the cam runs off.

cams · Cam A cycloidal cam at 60°. A 20-unit rise over 120°, a dwell, a return and a dwell. The dashed curve is the pitch curve — where the roller's centre travels — and the solid one is the surface that has to be cut, which is the pitch curve offset inward by the roller radius along its own normal. The pressure angle at this instant is 25.5°: the angle between the follower's direction of travel and the normal to the surface, and the number that decides whether the follower jams in its guide rather than sliding.

A lift is a size and a law is a shape

A cam's motion law is a dimensionless function of a dimensionless argument, so everything the cam field says about laws — which has the least acceleration, which has an impulsive jerk, which one costs least — transfers between cams of any size. What does not transfer is anything with the lift or the base circle in it.

cams · Cam What the valve does, against what the ratio promises. The solved valve lift, and the cam's lift multiplied by the nominal ratio. They are the same curve to the eye and they are not the same curve: the peak is 12.777 mm against a promised 12.842 mm, short by 0.51%. The shortfall is not an error in either number. It is what happens when a ratio measured at one position is applied across a movement, and it is why cam cards and rocker ratios are quoted together.

The cam is not the valve

A rocker arm's ratio is the ratio of two moment arms measured at one position, and the rocker swings twelve degrees while the valve opens. The instantaneous ratio runs 1.588 to 1.605, so the peak valve lift is 12.78 mm where the number on the box promises 12.84 — and the shortfall depends on how the rocker was set up, not on the cam.

applied · Cam Where the pad touches, and the rule that fixes it. The contact point's travel across the valve tip through one cam event, for a rocker squared up with the valve shut and for the same rocker squared up at mid-lift. The first wipes 1.35 mm and the second 0.34 mm — a factor of 4.0 for a shim under a stud. The rule an engine builder is taught is that the geometry is symmetric about wherever it is set square, so setting it square at rest puts the entire lift on one side of the symmetry. It is folklore that turns out to be geometry, and the same shim brings the peak lift back to 12.84 mm against 12.78.

Where the pad touches

A rocker's pad slides 1.35 mm across the valve tip through one cam event when the geometry is squared up with the valve shut, and 0.34 mm when it is squared up at mid-lift. The engine builder's rule about shimming a rocker stud is folklore that turns out to be geometry, and the same shim brings the peak lift back to what the ratio promised.

applied · Cam

Named alongside it

The objects these essays reach for when they reach for this one.

DerivativeFollowerMotion lawCamContact pointOperating pointRocker ratioBase circleCam profileEnvelopeFour-barIdentifiable

All concepts