Machine Kinematics
solved, then drawn
Concept

Bennett's linkage — where it appears

A four-bar loop in space that moves although every mobility formula says it cannot, provided its link lengths and twists satisfy one condition. It is the standard counterexample to counting freedoms without looking at dimensions.

Named by 7 essays across 3 fields — each of them below, with the objects they name alongside it.

Bennett's four-bar at 40°. Four bars, four revolute joints, and axes that are not parallel — a spatial four-bar, which Kutzbach counts at -2 degrees of freedom. Bennett's condition, sin α / a = sin β / b, makes the screw system rank 3 instead of 4, so the mechanism has 1. Driving the first joint through a full turn, 48 of 48 positions assemble. Orthographic projection, viewed from 40° azimuth and 24° elevation; dashed stubs mark the joint axes.

Bennett, and the condition that moves it

A spatial four-bar is immobile by every count there is, and generically it cannot even be assembled at more than isolated configurations. Bennett found the one relation between four lengths and two twists that makes it turn through a full revolution — and break the relation by two parts in a thousand and most of the travel is gone.

spatial · Spatial Whose constraints stay put. The largest principal angle between a mechanism's screw system at the start of its motion and at each later position. The 3 mechanisms whose motion lies in a subgroup of the rigid displacements — planar, spherical, translational — never leave the same subspace, and read between 1.9e-6 and 3.0e-6 degrees, which is the precision of an arccosine near one rather than a movement. The paradoxical ones turn through 49° and 57°. Every curve runs over its own range of motion, because Bricard's linkage assembles over 120 degrees and a shared axis would hide it.

Two ways to be overconstrained

A planar four-bar and Bennett's four-bar report the same redundancy, the same rank and the same wrong count. One of them is overconstrained at every set of link lengths; the other at exactly one ratio and nowhere near it. The difference is not in any of the numbers so far — but it is measurable, and the measurement is an angle.

spatial · Spatial The same error, twice, in two directions. A Sarrus linkage with one axis of one chain tilted off true, and the motion range that survives. Tilted within the plane the chain works in, it does not care: at 0.2 radians — eleven and a half degrees, which is not a manufacturing error by any standard — it still drives through a full turn. Tilted out of that plane, 0.001 radians stops it dead. Two hundred times the error, in the other direction, for no cost at all. What separates them is whether the perturbation lies in the screw system the mechanism leaves unconstrained — so "an overconstrained mechanism must be exact" is not merely crude, it is wrong about the case it is usually said of.

Fragility has a direction

Tilt one axis of a Sarrus linkage out of true by a thousandth of a radian and it stops dead. Tilt the same axis of the same mechanism by two hundred times as much, in the other direction, and it drives through a full turn with nothing measurably wrong. Three orders of magnitude between two errors of the same size — and the direction that matters is the one the reciprocal screw system names.

practice · Overconstraint What the clearance has to swallow. Bennett's linkage with its second length multiplied by 1 + δ, and the closure error the solver drives down to and then cannot improve on. The loop does not close at any δ tried, including one part in a million. But the gap is exactly proportional to δ — the ratio varies by 0.07% across four decades — with a measured constant of 0.507. Shared over 4 joints that is 0.127 δ of play per pin, so a linkage machined to one part in a thousand needs about 0.20 mm of clearance in a link of 1.6 m, or a hundredth of a millimetre in a link of 1.6 cm. That is an ordinary running fit, and it is why a mechanism that cannot be built is in every folding table.

Why a hinge works

A door hinge with three knuckles is overconstrained — three axes imposed where one would do, and exactly parallel is a condition no bored hole has ever met. It works because the misfit is 0.507 times the error and the play in each knuckle is larger than that. The mechanisms this site called unbuildable are built every day, and the thing that builds them is the clearance that was already there.

practice · Overconstraint How much of Bennett's turn survives a bar being wrong. The same four bars and the same four twists, with one bar's length changed by the amount on the left and nothing else touched. The bar shows the fraction of 48 sampled positions of the first joint at which the loop closes to within 10⁻⁹. Two parts in a thousand already costs most of the travel. This is what it means for a mechanism to work only on a condition rather than approximately near one — and it is why Bennett's linkage was a curiosity for eighty years before anyone could machine to it.

Bennett's condition is a ratio

A spatial loop's parameters are lengths and angles together, so a scaling touches only half of them. Bennett's condition — a over sine alpha equals b over sine beta — is a relation between the two halves, and what it demands of a machine is a relation between its lengths and its twists rather than a property of either.

spatial · Spatial Four instruments, and only the last one names the group. Every instrument this site has for an overconstrained loop, on the same six mechanisms. Kutzbach's count gives −2 for a planar four-bar and −2 for Bennett's. The rank of the constraint Jacobian gives three and three. Both are right and neither separates them. The last two columns are this field's: the span is how many dimensions the logarithms of the displacements the moving link actually reaches occupy, and closes at is the dimension after those are closed under the bracket. A planar four-bar closes at three and the three are planar motion; Sarrus closes at one, a translation, which is the exact straight line the spatial field measured by solving the mechanism sixty times. Bennett closes at six: its displacements occupy four dimensions and no group smaller than all of them contains those four. That is what "paradoxical" has meant on this site for six phases, stated as an integer.

Compose two positions and see where you land

Take two configurations a mechanism actually reaches, compose the displacements that got it there, and ask what kind of thing the result is. A planar four-bar lands inside planar motion, to 4 × 10⁻¹⁶. Sarrus lands on its own line. Bennett's linkage lands three tenths of a radian outside the four dimensions its own displacements occupy — a one-freedom motion that generates all six.

pairs · Pair Four instruments, and only the last one names the group. Every instrument this site has for an overconstrained loop, on the same six mechanisms. Kutzbach's count gives −2 for a planar four-bar and −2 for Bennett's. The rank of the constraint Jacobian gives three and three. Both are right and neither separates them. The last two columns are this field's: the span is how many dimensions the logarithms of the displacements the moving link actually reaches occupy, and closes at is the dimension after those are closed under the bracket. A planar four-bar closes at three and the three are planar motion; Sarrus closes at one, a translation, which is the exact straight line the spatial field measured by solving the mechanism sixty times. Bennett closes at six: its displacements occupy four dimensions and no group smaller than all of them contains those four. That is what "paradoxical" has meant on this site for six phases, stated as an integer.

A name for each overconstraint

The spatial field separated subgroup overconstraint from paradoxical by measuring how far a mechanism's screw system turns: 2 × 10⁻⁶ degrees against 89. That is a verdict without a name. Closing the logarithms of the reached displacements under the bracket gives the same verdict and says which group — planar, spherical, a translation — and for Bennett's linkage it says six.

spatial · Spatial

Named alongside it

The objects these essays reach for when they reach for this one.

MobilityOverconstraintScrew systemConstraintBricard's linkageDisplacement subgroupKutzbach's criterionParadoxical mechanismRankRedundant constraintClearanceLie bracket

All concepts