Machine Kinematics
solved, then drawn
Concept

Circumcentre — where it appears

The point equidistant from three given points, found as the meeting of the perpendicular bisectors of the segments between them. It is what a three-position synthesis reduces to: the centre of the circle a moving point's three positions lie on.

Named by 5 essays across 2 fields — each of them below, with the objects they name alongside it.

Three prescribed positions of a rigid body. The whole of the design problem, before any mechanism exists. A body has to occupy these three positions — each one a place and an angle, three numbers — and what carries it between them is not yet decided. A forward analysis starts from link lengths and finds the motion. This starts from the motion, and the lengths are what has to be found. The marked points are the poles: any planar displacement is a rotation about one point, so each pair of poses has one, and the arcs show the turn each represents through the body's own origin. A pole is a property of the displacement and not a mechanism — nothing has been chosen yet. 1 of the 3 poles lies outside this frame and is not drawn; near-parallel displacements push their pole a long way off.

The problem the other way round

Every essay before this one starts from link lengths and finds the motion. That is the reader's problem, because lengths are what a drawing shows. It is not the designer's problem, which is the reverse — and the reverse is hard enough that for a century the practical method was to look the answer up in a book.

synthesis · Synthesis One moving pin, and the pivot it turns about. Choose any point of the moving body — this one at (-0.55, 0.5) in the body's own frame. In the three prescribed poses it lands in three places, and three points that are not in a line lie on exactly one circle. That circle's centre is where the fixed pivot has to be and its radius is how long the link has to be: here 1.0860, and all three images sit at that distance to within 10⁻¹². There is no iteration and no tolerance in the construction, because three points determine a circle exactly. The freedom is entirely in which point of the body to pick.

Three positions, and a circumcentre

The whole of three-position synthesis is one observation: a moving point occupies three places, three points that are not in a line lie on exactly one circle, and that circle's centre is where the fixed pivot has to be. No iteration, no tolerance, and every point of the coupler is a candidate.

synthesis · Synthesis Of 1176 exactly correct syntheses, 176 could be built. Every pair of points on a 7×7 grid over the moving body, each pair synthesised into a four-bar and each four-bar verified by the forward solver as reaching all three prescribed poses. 1176 of them do, exactly. Then each is swept from the first pose in both directions, carrying the branch the way a built mechanism must: 810 cannot reach all three without being taken apart and reassembled, and 190 reach them in the wrong order. 176 — 15% — are mechanisms rather than theorems. Nothing in the construction distinguishes them.

Exactly right, and unbuildable

A linkage synthesised through three prescribed positions reaches all three. That is a theorem and it holds exactly. Whether it reaches them in one piece, without being taken apart, and in the order asked for, are separate questions the construction says nothing about — and of 1,176 exactly correct solutions, 176 could be built.

wrong · Misconception Burmester's curves, contoured rather than drawn. With three poses, every point of the moving body works: three images, one circumcircle. With four, a point's four images are concyclic only if it lies on a particular cubic — the circle-point curve — and the fixed pivots those points want lie on a second cubic, the centre-point curve. Both are drawn here as contours of a measured quantity: at each point of a 150×150 grid, how far the fourth image misses the circle through the other three, contoured at zero. Points refined onto the contour are concyclic to 3.8e-15; points 0.47 away from it miss by at least 2.0e-1. The two curves are keyed in the legend and the four prescribed poses are drawn faintly for scale. Three poses leave a designer the whole plane; four leave a curve. The four prescribed poses are outlined faintly for scale, and both curves are clipped to the frame: the centre-point curve is a cubic with unbounded branches that reach 360 units on a mechanism three units across, and the part worth looking at is the part near the machine.

What the fourth position costs

With three prescribed positions every point of the coupler will do, and a designer is spoilt for choice. Add a fourth and the whole plane collapses to a curve — only points on a particular cubic have four images that lie on a circle, and the cubic is Burmester's.

synthesis · Synthesis The body points whose three images are in a line. The three prescribed poses, faint, and a curve through them. At every point of a 110×110 grid over the moving body, the point is placed in all three poses and the signed height of its image triangle is measured; the curve is where that length is zero. Those are the points whose three images lie on a line, so the dyad they want is a slide rather than a crank. The curve is a circle. Refined onto the contour, its points lie on the circle through the three image poles to 2e-15, where the pole triangle's own circle misses them by up to 1.98. Its radius is 8.767, so inside a window three units across it reads as a gentle arc; 2 of the three image poles are in the frame and the third, P₁₃, is 6.8 units away.

Where a pin becomes a slide

Three-position synthesis gives every point of the moving body a fixed pivot, except the points whose three images fall in a line. Those want a slide, and they are not scattered: they lie on one circle, the circle through the three image poles, which a single line of algebra predicts and a contour of a measured length draws to 10⁻¹⁵.

synthesis · Synthesis

Named alongside it

The objects these essays reach for when they reach for this one.

SynthesisPrecision positionDyadBurmester theoryConstraintKinematic synthesisToleranceAssembly branchAtlasBranch defectthe Burmester curveCentre-point

All concepts