Machine Kinematics
solved, then drawn
Concept

Atlas — where it appears

A printed catalogue of coupler curves, once the only practical way to choose a linkage that draws a wanted shape. It was a substitute for computation, and its existence is a measure of how hard the inverse problem was before there was any.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

Three prescribed positions of a rigid body. The whole of the design problem, before any mechanism exists. A body has to occupy these three positions — each one a place and an angle, three numbers — and what carries it between them is not yet decided. A forward analysis starts from link lengths and finds the motion. This starts from the motion, and the lengths are what has to be found. The marked points are the poles: any planar displacement is a rotation about one point, so each pair of poses has one, and the arcs show the turn each represents through the body's own origin. A pole is a property of the displacement and not a mechanism — nothing has been chosen yet. 1 of the 3 poles lies outside this frame and is not drawn; near-parallel displacements push their pole a long way off.

The problem the other way round

Every essay before this one starts from link lengths and finds the motion. That is the reader's problem, because lengths are what a drawing shows. It is not the designer's problem, which is the reverse — and the reverse is hard enough that for a century the practical method was to look the answer up in a book.

synthesis · Synthesis Five points on one coupler. The same four-bar, with a tracing point rigidly attached to the coupler at five different places. Each curve is a sextic — degree six — and moving the attachment point a little changes it a great deal. That sensitivity is the reason coupler-curve synthesis was done with atlases of printed curves for most of the twentieth century: there is no simple inverse, so the practical method was to look one up.

What a coupler point draws

A point rigidly attached to the coupler of a four-bar traces a curve of degree six. Move the attachment a little and the curve changes a great deal. For most of the twentieth century the practical way to find the linkage that draws a wanted curve was to look it up in a book of printed atlases.

curves · Coupler The error between the precision points. chebyshev: worst 0.2232°, RMS 0.1475°; least-squares: worst 0.3900°, RMS 0.1203°. The error is zero at each precision point by construction and nowhere else. chebyshev has the smallest maximum here, and which curve is best depends entirely on which measure is asked for.

Where an optimiser starts

An approximate synthesis is a local search on an objective that is non-convex, disconnected and not everywhere defined, so the answer depends on where the search began. Nothing in the optimisation supplies that. What supplies it is the exact constructions the field spent four rungs on, and an atlas of coupler curves — which is why a method superseded by computers is still the thing that feeds them.

synthesis · Synthesis

Named alongside it

The objects these essays reach for when they reach for this one.

Coupler curveKinematic synthesisSynthesisApproximate synthesisBranch defectCircumcentreConstraintFunction generationInitial guessInstant centreInverse problemNelder mead

All concepts