Machine Kinematics
solved, then drawn
Concept

Disassembly — where it appears

The question of which parts of an assembly can be moved away from the rest, and in which directions. Its unit is a subset rather than a part, because two pieces can each be blocked in every direction by the other and come out together, so the search is over subsets and there are two to the power of the part count.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

Two ovals of one sextic. A four-bar with ground 4, crank 1, coupler 3.5, rocker 3, its coupler point solved at 720 crank angles on each assembly. Each assembly closes on its own oval through a full turn of the crank, and the two ovals never meet: they come no closer than 1.712. Every solved point satisfies the one eliminated sextic to 6.6 × 10⁻¹⁶ of its largest term. The machine drawn solid and the one drawn faint are the same four bars at the same crank angle of 60°, and taking a pin out is the only way from one oval to the other.

The curve the other assembly draws

A crank-rocker's two assemblies do not share a coupler curve. Each draws a whole closed oval of its own through a full turn of the crank, the two ovals never meet, and both are the zero set of one sextic, so the equation a machine's own motion determines also describes a second machine it can never become.

curves · Coupler A joint with no way out in the plane it is drawn in. A dovetail. The tail is wider at its far end than at the mouth it went in through, so every direction out of the mouth is blocked by a slanted face and every direction further in is blocked by the floor. In the plane of this drawing the joint cannot be taken apart at all, and the direction it does come apart in is the one the drawing does not show. The moving part touches the rest at 3 faces, each contributing one inequality on the direction it may be translated in — the direction must not have a negative component along that face's inward normal — and the set of directions that satisfy all of them is a cone in two dimensions rather than three, because a translation has no moment term. That is why a removal cone can be drawn as an angle where a mobility cone cannot. Here it is empty: every direction is refused by one face or another, so the part cannot be taken out by any translation and cannot have been put in by one either. That is a statement about the assembly and not about the part, and the direction the joint does come apart in is perpendicular to this drawing. positioned by solving, not by drawing.

Which way it comes out

Drop the rotation from the inequalities and the cone lives in two dimensions rather than three, so it can be drawn as an angle: a block in a vee has ninety degrees of directions out, a key in a slot has exactly one and no arc around it, and a dovetail has none at all. Three answers, and each of them is a different kind of joint.

holding · Restraint Neither one comes out, and the two of them do. Two congruent Z-shaped parts in a tray that is open at the top. Each has a step that lies over the other's, so part A's four contacts with part B have normals at all four points of the compass and leave it no free direction at all — and the same is true of B, for the same reason and by symmetry. The blocking is mutual and there is no order in which the two can be taken out one at a time. Together they have 6 contacts, all of them with the tray, and exactly one direction out: straight up. So the removal cone of a set of parts is not built from the removal cones of its members, and which part comes out first is a question with no answer here. positioned by solving, not by drawing.

Neither part comes out first

Two congruent Z-shaped pieces in a tray open at the top. Each has four contacts with the other, with normals at all four points of the compass, so each alone is blocked in every direction there is — and the pair lifts straight out. The removal cone of a set of parts is not built from the removal cones of its members, and *which part comes out first* is a question with no answer.

holding · Restraint

Named alongside it

The objects these essays reach for when they reach for this one.

BlockingContact normalEnumerationForm closureRemoval coneUnilateral constraintAssembly branchAssembly conditionCircuitCoupler curveDead centreDouble point

All concepts