Machine Kinematics
solved, then drawn
Concept

Non-circular gear — where it appears

A pair of wheels whose pitch curves are not circles, delivering a ratio that varies through the turn. The demand fixes both shapes completely, and the only design freedom left is choosing a demand whose mean closes.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

Two ellipses on their foci, at a ratio of 0.603. Each wheel is an ellipse turning about one of its own foci, with the centres a major axis apart. The focal property does the work: the two radii from the two foci add to the major axis, so the contact stays on the line of centres by construction, and the rolled arc lengths agree to 2.5e-8 of their length. The ratio at this instant is 0.6033; over a turn it runs from 0.538 to 1.857, a range of 3.4490 against the ((1+e)/(1−e))² = 3.4490 the eccentricity predicts. And one turn of one wheel is exactly one turn of the other, which is the condition that makes it a pair of wheels rather than a pair of curves. positioned by solving, not by drawing.

A ratio that is a function of the angle

A gear pair is usually two circles rolling. Ask instead for an output that runs forty per cent fast for half a turn and forty per cent slow for the other half, and the two shapes that deliver it are not a design decision — the demand fixes both pitch curves completely, and the only question left is whether they close.

meshing · Meshing One member of the family is a pair of wheels. The same demand — one plus 0.4 sin φ — scaled by a constant, and for each the angle the driven wheel is out by after one turn of the input. It has to be zero, or the teeth do not line up with themselves and there is no wheel. Only the unscaled member closes; five per cent either way leaves the output 18° out, which is a third of a tooth on a thirty-tooth wheel and a mechanism that seizes on its second turn. Non-circular gearing is a search rather than a drawing for exactly this reason: the closure condition is one equation on a whole function, and almost no function satisfies it.

The demand that cannot be met

Ask for an output rate and the two pitch curves follow with no design step in between — so the interesting question is not how to draw them but which demands admit any pair of wheels at all. The answer is one equation on a whole function, it is about the demand's mean and nothing else, and five per cent of error leaves the output eighteen degrees out after a turn.

meshing · Meshing

Named alongside it

The objects these essays reach for when they reach for this one.

Conjugate-actionMeshing equationPitch curvePitch pointVelocity ratioAssembly conditionCentrodeClosure conditionDescribing circleFunction generationQuick-returnRolling without slipping

All concepts