Machine Kinematics
solved, then drawn
Concept

Periodicity — where it appears

The number of turns after which a mechanism's pattern of contacts returns to exactly where it started. It decides how long a mechanism takes to repeat itself exactly, which is why a hunting tooth is chosen to make the period long rather than short.

Named by 4 essays across 3 fields — each of them below, with the objects they name alongside it.

Which teeth one tooth ever meets: 20 on 40. Follow one tooth of the pinion round and mark every wheel tooth it touches. It does not touch them all. It touches 2 of 40, which is z₂ divided by the greatest common divisor of the two counts — 20 here — and it goes on touching the same ones for as long as the gears are in mesh. The pattern repeats after 2 turns of the pinion. Adding one tooth to the pinion makes the counts coprime and takes the count from 2 to 40. The marks are produced by walking the mesh, and the count they give is compared with the gcd rather than derived from it.

Which tooth meets which

A tooth on a pinion does not meet every tooth on its wheel. It meets z₂ divided by the greatest common divisor of the two counts, and it meets the same ones for the whole life of the drive. On the default planetary used throughout — sun 24, planets 24 — a planet tooth touches exactly one sun tooth and never touches another, and nothing in the drawing says so.

gears · Tooth 53/11, instant by instant. The ratio a 53-tooth sprocket and a 11-tooth sprocket actually deliver, against the driver's rotation. The quoted 4.818 is the flat line, and it is exactly right as an average — the mean over a turn comes out at 4.8182, which the computation is never told. Within every tooth the ratio swings from 4.756 to 4.948, a fluctuation of 3.99%. The sharp corners are pins seating: the identity of the pin the strand runs from changes 53 times a turn on one sprocket and 11 times on the other, and the two do not coincide.

The chain is a polygon

A chain's pins sit on a polygon, so the radius that matters swings by 1 − cos(π/n) within every tooth: four per cent on an eleven-tooth sprocket. The quoted 53/11 is the mean of that, exactly — and how much of the fluctuation reaches the back wheel is decided by the fractional number of pitches in the taut strand, which nobody adjusts and which can take the drive from perfectly uniform to two per cent.

applied · Tooth A geared five-bar at 3 : 2, its coupler pin traced over 2 input turns. Two cranks of length 1 on pivots 3 apart, meshed through gears whose pitch circles, dashed, have radii 1.800 and 1.200, so the second crank turns 1.5000 times for every turn of the first and the other way. Coupler bars of 3 and 2.5 join them at the pin C, and the thin curve is where C goes over 2 turns of the input. The two crank pins are always between 1 and 5 apart and the bars can span 0.5 to 5.5, so the chain never meets a dead position. After 2 turns the machine is exactly where it began and the curve is closed.

One freedom, and a motion that never repeats

Mesh a gear on each crank of a five-bar and the count and the rank agree that one freedom is left, at every gear ratio. Whether the machine ever comes back to where it started is a different question, and neither instrument can see it: at 3 to 2 it is home after two turns, at 37 to 23 after twenty-three, and at the golden ratio never, with its nearest returns at the Fibonacci numbers.

constraint · Mobility The field of action, straight and slanted. The rectangle a contact lives in: its width is the usable line of action, its height is the face width, and a new contact line enters every base pitch. On the left the teeth are straight, so the lines are vertical and each one arrives and leaves all at once — the total length in contact jumps by a whole face width, 40 mm, every base pitch. On the right the same pair with a 20° helix: the lines lean by the base helix angle, so a tooth enters at one end of the face before it has left at the other, and the total changes by 3.44 mm instead of 40. Nothing about the profile is different between the two panels.

Contact that runs along the tooth

A straight tooth engages along its whole face at once, so the amount of contact at a mesh is a square wave. Slant the tooth and a second contact ratio appears that has no tooth count in it and no pressure angle — bought with face width and helix angle alone, and able to reach a value at which the total length of contact stops varying at all.

gears · Tooth

Named alongside it

The objects these essays reach for when they reach for this one.

MeshDesign ruleVelocity ratioApproximationBase pitchChain driveChordal actionConfiguration spaceConstraint jacobianContact ratioContinued fractionDerivative

All concepts