Machine Kinematics
solved, then drawn
Concept

Ratio steps — where it appears

The ordered set of reductions a gearbox offers, together with the multiplicative steps between consecutive ones. The steps between consecutive ratios are what a driver feels, and they are decided by the same two or three tooth counts that decide the ratios themselves.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The steps, against the ones the rule asks for. The design rule everybody quotes is that the steps between gears should be equal in ratio, so that the engine returns to the same speed after every shift. That makes the sequence geometric, and the ideal step for this spread over this many gears is 1.5324, marked. The steps a gearset actually gives are not free: the whole sequence is a function of the tooth counts, so once the top and bottom are chosen there is nothing left to spend on the middle. The worst step here is off the ideal by 10.8%.

The steps are not free

A gearbox is supposed to have equal steps between its gears, so that the engine returns to the same speed after every shift. A gearset has one or two numbers to spend on three or four gears, so from the third one the steps are a consequence rather than a choice — and asking for them to be equal turns out to be a quadratic whose root is the golden ratio, realised in tooth counts by consecutive Fibonacci numbers.

transmission · Transmission A ratio with no steps in it. Two pulleys whose sheaves slide on their shafts, and one belt. Pushing the primary's sheaves together makes the belt ride further out; the secondary's radius is then not a choice, because the belt is a fixed length and its length over two pulleys at a fixed centre distance is a function of both radii. So the secondary's radius here is the root of that equation, solved rather than assumed, and the drawn belt is the length it is supposed to be to 0.0e+0 mm. Ratio 1.000, with the two radii adding to 110.00 — a number the received rule of thumb says should not change and which changes by 2.6% across the travel.

A ratio with no steps in it

Push a variable pulley's sheaves together and the belt rides further out. The other pulley's radius is then not a choice — the belt has a fixed length — so it is the root of an equation, solved rather than set. The rule of thumb that says the two radii add to a constant is true to first order and wrong by 7.4% of the ratio at full shift, and the departure has a closed form.

transmission · Transmission

Named alongside it

The objects these essays reach for when they reach for this one.

Design ruleTransmission relationVelocity ratioApproximationBelt driveCatalogue numberContinuously variableDimensionless ratioEpicyclicGeometric progressionRavigneauxRoot-finding

All concepts