Machine Kinematics
solved, then drawn
Concept

Spatial mechanism — where it appears

A mechanism whose links move in three dimensions, so a body has six freedoms and a revolute joint takes five. The arithmetic is far tighter than the planar case: a mobility of one needs (6n−7)/5 joints, which is an integer only for link counts leaving a remainder of two on division by five.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

Kutzbach's count against the measured mobility. Five closed loops of revolute joints. The count is 6(L − 1) − 5j, a statement about how many links and joints there are; the measurement is the number of joints minus the rank of the loop's screw system, which knows only where the axes point. They disagree for four of the five, and the one they agree on is the generic seven-joint loop — so the formula is not broken, it is blind to the special geometry that makes the other four work. The universal joint is counted at -2 degrees of freedom and is in every car built.

Six freedoms, not three

Every mechanism on this site so far has been flat, and flatness is not a simplification made for teaching — it is a special case that hides the most interesting thing constraint counting does, which is get the answer wrong about mechanisms that are in daily use.

spatial · Spatial crank rocker: the closest pair at one position. The site's standard four-bar: ground 4, crank 1, coupler 3.5, rocker 3. Every joint is where the solver put it, exactly as in the linkage field; the material is the only thing added. The heavy segment joins the two closest points over every pair of parts that is tested — which excludes pairs sharing a pin, since their material surrounds that pin by construction — and its length is the gap: 0.5438 here, between coupler · frame. A negative value is a penetration depth, the distance the pair would have to be moved apart, and it is drawn in the warning colour.

Two bars that have to cross

The site's own four-bar has its coupler inside its frame by a full link width for the whole of a turn. It is not an impossible mechanism; it is a mechanism that cannot be built in one plane — and the plane it has been drawn in for twenty-three fields was a convenience nobody had to pay for.

bodies · Body In space the arithmetic allows almost nothing. A body in space has six freedoms and a revolute joint takes five, so a mobility of one needs (6n − 7)/5 joints — and that is an integer only when the link count leaves a remainder of two on division by five. The whole table is this: 7, 12, 17, 22 links, and nothing else. At seven links the degrees must sum to fourteen across seven links with none below two, so every link is binary and the graph is a single seven-cycle: there is exactly one spatial chain, and it is a loop. That is the census explanation for something the spatial field has lived with since it was written — every spatial mechanism on this site is one closed loop — and it had never been stated as a count. The next admissible size is twelve links and thirteen joints, where two assortments are arithmetically possible, 157 candidates give 33 graphs, and 5 of them are chains — every one with ten binary links and two ternary, so the assortment with a quaternary link is empty exactly as four of the planar ones are.

In space there is one chain

A body in space has six freedoms and a revolute joint takes five, so a mobility of one needs (6n−7)/5 joints — an integer only when the link count leaves a remainder of two on division by five. At seven links every link is binary, the graph is a single seven-cycle, and there is exactly one spatial chain.

spatial · Spatial

Named alongside it

The objects these essays reach for when they reach for this one.

Kinematic chainKutzbach's criterionMobilityOverconstraintScrewBearing pedestalChromatic numberConflict graphConstraintDegenerate chainDegrees of freedomInterference

All concepts