Machine Kinematics
solved, then drawn
Concept

Transmission error — where it appears

The departure of a pair's output angle from the relation it was designed to produce. For an involute pair it stays at floating-point zero when the centres move; for a cycloidal pair it does not.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

A flank nobody would draw, and the partner it forces. On the left, a driving flank made up on purpose: a rising curve with a nine-cycle wobble on it, chosen to be nothing in particular. On the right, in the driven wheel's frame, the shape that has to mate with it. There was a contact at all 121 sampled positions and the worst residual of the meshing equation was 3.13e-10. Conjugate action does not single out the involute — every profile has a partner that holds the ratio exactly, and the reasons for preferring one tooth form over another are all somewhere else. Generating back the other way returns the original flank to 2.33e-5 mm over 61 points. positioned by solving, not by drawing.

Any shape has a partner

Conjugate action does not pick out the involute. Hand the construction a flank invented on purpose to be nothing in particular and it returns a mate that holds the ratio exactly — so the question a tooth form answers is not whether it can transmit motion, and every real reason for choosing one is somewhere else.

meshing · Meshing The measurement every gear cut since 1900 is a consequence of. Take a pair that is conjugate at its design centre distance, move the shafts apart, and ask what shape the driven wheel would have to be for the ratio to hold. The involute wants the same shape at every distance — 2.91e-8 mm at two millimetres out, which is the comparison's own noise floor — because its shape is fixed by its base circle and the centre distance is not one of that circle's arguments. The cycloidal pair is conjugate at nought and wants a shape 6.71e-3 mm different at five hundredths of a millimetre out, because its describing circle has to roll between two pitch circles that are no longer touching. A bearing that wears, a housing bored a little wide, a case that warms up: all of them are this axis.

The shape that does not mind where the shafts are

Two tooth forms, both exactly conjugate, both in use for centuries. Move the shafts five hundredths of a millimetre apart and one of them wants a different shape and the other does not — and that single measurement is close to the whole reason every gear cut since about 1900 is an involute.

meshing · Meshing

Named alongside it

The objects these essays reach for when they reach for this one.

Conjugate-actionDescribing circleInvoluteBacklashCentre distanceContact normalcycloidal motionEnvelopeEpicycloidHypocycloidthe law of gearingLine of action

All concepts