Machine Kinematics
solved, then drawn
Concept

One way — where it appears

A property of a mechanism whose admissible motions have a direction, so that its reachability relation is an order rather than an equivalence. It is what makes a ratchet's set of reachable configurations a one-way relation, so that two configurations can be joined in one direction and not in the other.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

A 12-tooth ratchet, holding. A ratchet wheel with a 8° tooth face and its pawl. The long line is the face extended; the short one through the contact is the normal the tooth pushes along, and both belong to the wheel and turn with it. The pawl holds, and the reason is which side of those two lines its pivot is on: 1.080 wheel radii from the face's line and 0.495 from the normal's, and on opposite sides of them. Nothing about how hard anything pushes enters the question: a normal is a direction and a moment arm is a length with a sign. Dragging turns the wheel the way it may go, and the pawl's tip is solved onto the wheel's surface at every frame: it is lifted up a tooth's back and dropped into the next notch, once per click.

A joint that works one way

A pawl either holds a ratchet or is levered out of it, and which one happens is decided by two lines through the contact. One of them is the rule a workshop quotes. The other is the boundary that rule leaves out, and a check written to confirm the quoted rule turned out to be incapable of failing.

timing · Intermittent One piece, and still not reachable. The state of a linear ratchet — a cable tie — is how far in it is pulled, and its free space is the whole interval: every state is connected to every other, with no barrier anywhere. What it does not have is a way back. From the marked state the reachable set is everything forward and only as far back as the tooth the pawl has already dropped into, so 52.1% of ordered pairs are reachable and 4.2% are reachable both ways. Connectivity is symmetric; reachability is an order, and a component count answers the first question and cannot be asked the second.

One piece, and still not reachable

The site decides whether two configurations can be joined by asking whether they are in the same connected component, and that relation is symmetric because a path run backwards is a path. A one-way mechanism breaks the symmetry and leaves the connectivity alone: its free space is a single interval with no barrier anywhere in it, and about half of the ordered pairs of states cannot be joined by any admissible motion.

timing · Intermittent

Named alongside it

The objects these essays reach for when they reach for this one.

Contact stateIntermittent motionPawlRatchetAssembly branchConfiguration spaceConnected componentContact normalFree spaceHigher pairIndexingLever arm

All concepts