Machine Kinematics
solved, then drawn
Concept

Roller follower — where it appears

A cam follower carrying a roller, so that the profile it rides on is the pitch curve offset inward by the roller's radius. The roller turns rather than sliding across the cam, so the sliding at the contact is traded for rotation in a bearing — and the offset that produces the profile has a sign that has to be right.

Named by 6 essays across one field — each of them below, with the objects they name alongside it.

A 34-unit roller on a 20-unit base: the cam cannot be made. The outer curve is the pitch curve — where the roller's centre has to go, which is just the base radius plus the follower's displacement, plotted in polar coordinates. The inner curve is what has to be cut: the pitch curve offset inward by the roller's radius along its own normal. Where the pitch curve bends more tightly than the roller is wide, that offset crosses itself, and the metal the profile needs has already been removed. The tightest radius of curvature here is 19.43 at 85°, against a roller of 34 — so the cam is undercut by 14.57 and no amount of care in manufacture recovers it. The pressure angle, meanwhile, peaks at a perfectly comfortable 21.2°: this cam fails a test it never looked like failing.

The cam that cannot be cut

A cam has to be big enough for two reasons, and they are not the same reason. One is that the follower will jam in its guide if the pressure angle is steep. The other is that the roller will gouge the profile if the curvature is tight — and there is a combination where the pressure angle is comfortable and the cam still cannot be manufactured at all.

cams · Cam A cam profile is an envelope, and its curvature obeys the same law. The dashed curve is the pitch curve — where the roller's centre travels — and the solid one is the surface that has to be cut, which is the pitch curve offset inward by the roller radius. That offset is the conjugate law of this field with one centre of curvature sent to infinity, and it says ρ_cut = ρ_pitch − r. Measured off the drawn polyline at six angles, the worst departure is 4.8e-7: at 95° the pitch curve has radius 29.52 and the cut profile 21.52, against 21.52 predicted. It is also why undercutting is a curvature condition rather than an accident: where ρ_pitch falls below the roller radius the offset turns itself inside out.

A profile is an envelope

A cam's surface is not a curve somebody drew. It is the envelope of the roller as the roller runs round the pitch curve, and its curvature is the pitch curve's less the roller radius — a law that this site's cam library was breaking for six months, in the one curve that gets manufactured and the only one no check looked at.

cams · Cam A roller offset by 5.88, at 42.3° of the rise. The cycloidal programme — rise 20 over 90°, return over 170° — on a prime circle of 40 with a roller of 10, drawn with the follower fixed above and the cam turned anticlockwise to 42.3°. The follower's line of travel is 5.88 to the right of the cam's centre. The contact normal leans 21.81° from that line, which is the pressure angle, and measured off the drawn pitch curve it is 21.81°. At this offset the peak on the rise is 21.81° and on the return 21.81°; centred, they are 27.37° and 15.33°.

An offset trades the rise for the return

Moving a roller follower's line of travel off the cam's centre lowers the pressure angle on one stroke by raising it on the other. When the rise and the return are mirror images the best offset is zero. When the cam rises in 90° and returns over 170°, an offset of 5.88 takes the worse stroke from 27.37° to 21.81° by handing the return 6.48° it did not need.

cams · Cam A roller on an arm of 50 pivoted on the left, at 35.8° of the rise. The cycloidal programme — rise 20 over 90°, return over 170° — on a prime circle of 40 with a roller of 10, followed by a roller on an arm of 50 whose pivot is on the left of the cam, at (−49.92, 42.79). The pivot angle balances the two strokes, and the cam is turned anticlockwise to 35.8°. The faint arc is the path the roller's centre swings through. The contact normal leans 23.48° from the roller's direction of motion, which is the pressure angle, and off the drawn pitch curve it is 23.48°. At this instant the roller's line of motion passes 2.98 from the cam's centre. Balanced, the arm peaks at 23.48° on both strokes; a sliding follower at its best offset of 5.88 peaks at 21.81°.

An arm is an offset that grows with the lift

Carry a cam's roller on a swinging arm instead of a slide and its pressure angle obeys the offset follower's formula exactly, with the offset replaced by the distance of the roller's line of motion from the cam's centre. That distance turns with the arm. On a cam whose strokes are mirror images the best arm is worse than a centred slide by about 5,000/L² degrees and leans the follower by its own tilt on the dwells. On a quick-rise cam the pivot's angle rebalances either side of the cam for under a degree, where a sliding offset moved to the wrong side costs eleven.

cams · Cam A roller in the groove of a quick-rise cam at 600 rpm. The cycloidal programme — rise 20 over 90°, return over 170° — cut as a groove on a prime circle of 40 for a roller of 10, driving a follower of 0.5 kg pressed toward the cam by 20 N, and turned anticlockwise to 59.9° at 600 rpm. The groove must supply m·s″·ω² + F along the follower's travel, −66.6 N at this angle, so the roller bears on the outer wall. The marks on the groove are the four places in a turn where that force changes sign and the roller changes walls: 47.87°, to the outer; 87.13°, to the inner; 151.35°, to the outer; 193.65°, to the inner. The stretches of deceleration begin to cross over at 267.6 and 505.5 rpm.

A roller in a groove changes walls with the speed

A groove holds its roller between two walls and chooses between them by the sign of one force, the follower's mass times its acceleration plus the load pressing it in. Below a threshold speed that force never changes sign and the roller stays on the inner wall; each stretch of deceleration adds two crossovers above its own threshold. On a quick-rise cam at 20 N and half a kilogram the count goes from none to two at 268 rpm and to four at 506. A cycloidal law brings the roller across smoothly; a constant-acceleration law throws it across by a step of 3,200 N at 3,000 rpm.

cams · Cam The roller's flight across a 0.05 mm clearance at every crossover. The cycloidal quick-rise programme carrying 0.5 kg against 20 N at 600 rpm, with 0.05 mm between the roller and the wall it is not bearing on. At each sign change of the groove's force the roller leaves its wall, and each curve is the gap it opens, from nought to the far wall at the top of the plot: leaves at 47.9° and lands 6.6° later at 80 mm/s; leaves at 87.1° and lands 7.1° later at 63 mm/s; leaves at 151.4° and lands 14.6° later at 35 mm/s; leaves at 193.6° and lands 13.4° later at 42 mm/s. Dragging the speed moves the crossings, lengthens or shortens each flight, and just above a stretch's threshold shows a flight that never reaches the far wall.

The time a crossover takes

A roller in a groove changes walls where the groove's force changes sign, and it gets there by flying across the clearance. How hard it lands depends on the clearance through an exponent the motion law decides — two thirds where the force passes through nought, one half where it steps — a flight that ends in a dwell lands at √(2cF/m) whatever the speed, and just above each threshold the force changes sign and the roller never arrives at all.

cams · Cam

Named alongside it

The objects these essays reach for when they reach for this one.

DwellCamAccelerationPitch curvePressure angleCam profilecycloidal motionForm closureMinimaxMotion lawOffset followerPrime circle

All concepts