Machine Kinematics
solved, then drawn
Concept

Similarity — where it appears

A transformation that multiplies every distance by one factor and leaves every angle alone. A construction that commutes with it produces figures of families rather than of machines, and a quantity unchanged by it is a property of a design rather than of one built object.

Named by 5 essays across 2 fields — each of them below, with the objects they name alongside it.

Three machines a protractor cannot tell apart. The same four-bar at 0.60×, 1.00×, 1.50×, drawn one inside another at the same crank angle. Every one of them puts its output link at 102.914064°, and the three readings differ by 2.8e-14° — which is the solver's floor rather than a difference. A protractor on the output link is reading a function of the ratios of the lengths, so it is the same function for every member of this family, at every crank angle, exactly. Whatever such an instrument recovers, it is not the size of the machine.

The direction no protractor can see

A four-bar's output angle depends only on the ratios of its lengths. That is a sentence anybody would agree to, and it has a consequence with a number attached: the vector of the four lengths is annihilated by every row of the machine's own identification Jacobian, to 7.6 × 10⁻¹⁵, at every pose, for ever.

metrology · Parameter 3 four-bars, one coupler curve. Three different four-bars, with different ground pivots, different link lengths and different proportions — 0.692 and 0.799 times the size of the first. Every one of them draws this same curve. Roberts's theorem says there are always exactly three, and the construction is one complex multiplication: write the coupler point as λ = (P − A)/(B − A), put the third fixed pivot at O₂ + λ(O₄ − O₂), and the other two linkages fall out with their bars' roles permuted — what is a coupler in one is a crank in another. The curves here were traced separately, each from its own solver runs, and agree to 1.3e-5 against a sampling resolution of 1.4e-5 — which is to say, as closely as the comparison can tell.

Three linkages, one curve

Every coupler curve is drawn by three different four-bars, not one. The other two can be constructed from the first with a single complex multiplication, they have different proportions and different ground pivots, and the roles of their bars are permuted — what is a coupler in one is a crank in another.

synthesis · Synthesis Three prescribed positions of a rigid body. The whole of the design problem, before any mechanism exists. A body has to occupy these three positions — each one a place and an angle, three numbers — and what carries it between them is not yet decided. A forward analysis starts from link lengths and finds the motion. This starts from the motion, and the lengths are what has to be found. The marked points are the poles: any planar displacement is a rotation about one point, so each pair of poses has one, and the arcs show the turn each represents through the body's own origin. A pole is a property of the displacement and not a mechanism — nothing has been chosen yet. 1 of the 3 poles lies outside this frame and is not drawn; near-parallel displacements push their pole a long way off.

What a synthesis assumes it knows

Every construction in this field is handed a demand in absolute coordinates — three positions of a coupler plane, at stated places — and returns a linkage in the same coordinates. Scale the demand and the answer scales, which means the construction's whole content is about shape and its answer carries a size it was given.

synthesis · Synthesis Which numbers have a size. Twelve quantities from eight fields of mechanism kinematics, each scaled by taking every length in its mechanism up and down together and fitting the power its value follows. A shape lands on zero, a length on one, a curvature on minus one, an area on two, and every row lands on an integer to 3.3e-11. The sorting is not a units argument — it is measured from each field's own library, by asking that library the same question. What it says is that most of what kinematics computes is a shape: a mobility, a Grashof class, a transmission angle, a contact ratio and a velocity ratio are all unchanged by making the machine bigger, so all of them are recoverable from a measurement that cannot recover a single length. The row worth stopping at is the tolerance band: held to a fixed ±0.01 it lands on minus one, because ±0.01 is a length and a bigger machine held to the same absolute tolerance is a better machine. Written as a percentage the same band lands on zero. One quantity, two drawing conventions, two different kinds of number.

Which numbers have a size

Take every length in a mechanism up and down together and fit the power each computed quantity follows. A transmission angle lands on zero, a coupler point's speed on one, a path curvature on minus one, an enclosed area on two — and a tolerance band held to a fixed ±0.01 lands on minus one, which nobody would guess.

metrology · Parameter Which numbers have a size. Twelve quantities from eight fields of mechanism kinematics, each scaled by taking every length in its mechanism up and down together and fitting the power its value follows. A shape lands on zero, a length on one, a curvature on minus one, an area on two, and every row lands on an integer to 3.3e-11. The sorting is not a units argument — it is measured from each field's own library, by asking that library the same question. What it says is that most of what kinematics computes is a shape: a mobility, a Grashof class, a transmission angle, a contact ratio and a velocity ratio are all unchanged by making the machine bigger, so all of them are recoverable from a measurement that cannot recover a single length. The row worth stopping at is the tolerance band: held to a fixed ±0.01 it lands on minus one, because ±0.01 is a length and a bigger machine held to the same absolute tolerance is a better machine. Written as a percentage the same band lands on zero. One quantity, two drawing conventions, two different kinds of number.

A count is neither

Every quantity in the scaling survey lands on an integer power — zero for a shape, one for a length, two for an area. A mobility lands nowhere. It has no dimension at all, it does not move under any perturbation, and the probe that sorts the rest of the site's numbers returns nothing for it.

metrology · Parameter

Named alongside it

The objects these essays reach for when they reach for this one.

IdentifiableScale invarianceGrashof's conditionTransmission angleAssembly-modeBurmesterChebyshev's linkageCognate linkageConstraint rankCoupler curveDefectFreudenstein invariants

All concepts