Machine Kinematics
solved, then drawn
Concept

Tooth count — where it appears

The number of teeth cut round a gear, which is an integer and is therefore the one quantity in a drive that cannot drift. Every ratio in a gear train is a quotient of two of them, so the ratio is exact at every position and on every unit ever made, and one tooth wrong changes it permanently.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

404 ways to gear 60 to 1. Each dot is a pair of wheels and a pair of pinions whose ratios multiply to exactly 60, with wheels of 40 to 120 teeth and pinions of 6 to 16 leaves. The line is the hyperbola every exact answer must lie on; the dots are the ones that lie on it at whole numbers of teeth, and there are 404 of them. In a single pair there are 0 — a ratio of sixty needs a wheel of 360 teeth against a pinion of six, and nobody cuts that. Exactness is decided in integers here and never by comparing floating-point ratios, which is the one way a search like this quietly returns answers that are merely close.

A clock is a factorisation

A going train's job is a ratio and its parts are tooth counts, so whether a clock can be built is whether a number factorises inside the counts a wheel-cutting engine will cut. Sixty has 404 answers in two pairs and none at all in one. The ratio between a sidereal day and a mean one has none in any number of pairs, and the best two-pair train is out by a sixth of a second a day.

gears · Tooth Two cones, 20 teeth and 40, at 90°. The axial section, which is where every bevel quantity is read. Two cones share an apex and roll on one another along the element drawn heavy; their half-angles are 26.57° and 63.43°, adding to the shaft angle, and the ratio of their sines is the tooth-count ratio exactly. The dashed arc is the sphere of radius 22.36 on which a bevel tooth's profile actually lies. The two short lines perpendicular to the common element are the back cones; each is heading for its own axis at a distance r/cos δ from the pitch circle — 11.18 and 44.72 — and that distance is the pitch radius of the spur gear the tooth is really cut to. Both back cones lie on one line, because there is only one perpendicular to the pitch element at that point, and the two heavy stubs straddling it are the two teeth — each one addendum out from the pitch circle and 1.25 in.

A tooth that lives on a sphere

Every tooth in this field so far has been a curve in a plane, forced by the law of gearing and exact. A bevel tooth's profile lies on a sphere, no piece of a sphere flattens without stretching, and so the shape a bevel gear is actually cut to is an approximation — the only one in the field.

gears · Tooth

Named alongside it

The objects these essays reach for when they reach for this one.

ApproximationBase circleBeatConjugate-actionDesign ruleEscapementFactorisationGear trainIntegerInvolutePinionScale invariance

All concepts