Machine Kinematics
solved, then drawn
Concept

Beat — where it appears

One half period of an escapement's oscillator, in which the escape wheel advances by exactly half a tooth pitch. It is the unit a clock counts in, so the escape wheel's tooth count and the going train's ratios together decide how many beats there are to an hour.

Named by 4 essays across 3 fields — each of them below, with the objects they name alongside it.

30 teeth and two pallets. An escape wheel of 30 teeth and a pair of pallets spanning 4 and a half tooth pitches. The heavier line at each pallet is the locking face, here an arc about the arbor; the lighter one is the impulse face the tooth slides along once it is let go. The wheel is drawn where the contact puts it, not where it looks well: at this pallet angle the tooth in play sits on the lock face and the wheel is -0.0320° from it. Dragging the pallet through its whole engagement moves the wheel by 0.106° of recoil. Of the 6.0° the wheel turns each beat, 65.9% is drop and does nothing.

Where the tooth lets go

A pair of pallets spanning a whole number of tooth pitches and a half advances the escape wheel exactly half a pitch every beat, and that half pitch divides into the impulse and the drop with nothing left over. Drop is not chosen. It is whatever the impulse leaves, and on a thirty-tooth wheel it is two thirds.

timing · Intermittent 404 ways to gear 60 to 1. Each dot is a pair of wheels and a pair of pinions whose ratios multiply to exactly 60, with wheels of 40 to 120 teeth and pinions of 6 to 16 leaves. The line is the hyperbola every exact answer must lie on; the dots are the ones that lie on it at whole numbers of teeth, and there are 404 of them. In a single pair there are 0 — a ratio of sixty needs a wheel of 360 teeth against a pinion of six, and nobody cuts that. Exactness is decided in integers here and never by comparing floating-point ratios, which is the one way a search like this quietly returns answers that are merely close.

A clock is a factorisation

A going train's job is a ratio and its parts are tooth counts, so whether a clock can be built is whether a number factorises inside the counts a wheel-cutting engine will cut. Sixty has 404 answers in two pairs and none at all in one. The ratio between a sidereal day and a mean one has none in any number of pairs, and the best two-pair train is out by a sixth of a second a day.

gears · Tooth The fork and the roller, which is a Geneva pair. A lever escapement's fork with the balance's impulse pin inside it. The pin is on a roller of 0.150 against a fork of 1.00, and the slot points at the pin — which is the entire kinematic relation and is the same one a Geneva drive's pin and slot obey. The same eight lines answer both, and the check is that they reproduce the cams field's independently written Geneva solution to fourteen figures. The pin is in the fork for 44.4° of the balance's swing out of 540°, so the balance is left alone for 91.8% of the beat. Drag the balance.

Detached, and safe while detached

A lever escapement touches its balance for a twelfth of each beat and leaves it alone for the rest. What connects the two is a pin entering a radial slot — the same pair a film projector's Geneva drive is made of, solved by the same eight lines — and the sine rule then fixes the balance's lift angle at 44.4°, which is the number a Swiss lever is specified at.

timing · Intermittent Half a tooth, spent three ways. Each bar is one beat of the escape wheel: exactly half a tooth pitch, 6.0° on 30 teeth, whatever the faces are cut like. The dark part is the impulse, which is the only part that does anything to the pendulum; the pale part is the drop, in which nothing is touching anything; the short tail is the lock-in run, in which the arriving tooth drags the wheel backwards as it settles. On the arc with no draw that tail is exactly zero and the budget has two terms. On every other face it is not, and the three still sum to the half pitch to twelve figures — which is the check, since the three are computed from three different contacts.

What a drop cannot be smaller than

Two thirds of an escape wheel's travel is drop, and drop does nothing. The obvious economy is to cut it down, and it cannot be cut down, because every dimension it is made of has a tolerance and a drop smaller than the accumulated error is a tooth that does not clear the pallet it is leaving. The stack is 0.39°, and it barely moves when the tooth count triples.

practice · Tolerance

Named alongside it

The objects these essays reach for when they reach for this one.

EscapementDropEscape wheelPalletApproximationBalanceBankingClearanceDetachedDrawDwellFactorisation

All concepts