Machine Kinematics
solved, then drawn
Concept

Escape wheel — where it appears

The last wheel of a going train, whose teeth are alternately released and arrested by a pair of pallets. Its tooth count fixes how many beats there are to a turn, and the shape of its tooth faces decides how much of the train's push reaches the oscillator.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

30 teeth and two pallets. An escape wheel of 30 teeth and a pair of pallets spanning 4 and a half tooth pitches. The heavier line at each pallet is the locking face, here an arc about the arbor; the lighter one is the impulse face the tooth slides along once it is let go. The wheel is drawn where the contact puts it, not where it looks well: at this pallet angle the tooth in play sits on the lock face and the wheel is -0.0320° from it. Dragging the pallet through its whole engagement moves the wheel by 0.106° of recoil. Of the 6.0° the wheel turns each beat, 65.9% is drop and does nothing.

Where the tooth lets go

A pair of pallets spanning a whole number of tooth pitches and a half advances the escape wheel exactly half a pitch every beat, and that half pitch divides into the impulse and the drop with nothing left over. Drop is not chosen. It is whatever the impulse leaves, and on a thirty-tooth wheel it is two thirds.

timing · Intermittent How far back the wheel is pushed. Recoil against the part of the pendulum's swing that happens after the tooth has landed. The arc cut concentric with the pallet arbor is the flat line on zero, and it is zero as a matter of arithmetic rather than of smallness: rotation about the arbor carries that arc into itself, so the tooth's resting place does not move and every sampled value is the same double. Every other face rises. The flat face with no draw at all is the interesting one — it starts at zero and curves, because it agrees with the arc to first order and not to second, which is precisely the amplitude sensitivity a deadbeat exists to remove.

The wheel that goes backwards

While a pendulum finishes its swing the escape wheel is doing something, and what it does is decided entirely by the shape of the face the tooth is resting on. An arc about the pallet arbor sends it nowhere — not nearly nowhere, the same double at every sample. A flat cut tangent to that arc is dead at exactly one point of itself, and it is the one point the tooth never rests on.

timing · Intermittent Half a tooth, spent three ways. Each bar is one beat of the escape wheel: exactly half a tooth pitch, 6.0° on 30 teeth, whatever the faces are cut like. The dark part is the impulse, which is the only part that does anything to the pendulum; the pale part is the drop, in which nothing is touching anything; the short tail is the lock-in run, in which the arriving tooth drags the wheel backwards as it settles. On the arc with no draw that tail is exactly zero and the budget has two terms. On every other face it is not, and the three still sum to the half pitch to twelve figures — which is the check, since the three are computed from three different contacts.

What a drop cannot be smaller than

Two thirds of an escape wheel's travel is drop, and drop does nothing. The obvious economy is to cut it down, and it cannot be cut down, because every dimension it is made of has a tolerance and a drop smaller than the accumulated error is a tooth that does not clear the pallet it is leaving. The stack is 0.39°, and it barely moves when the tooth count triples.

practice · Tolerance

Named alongside it

The objects these essays reach for when they reach for this one.

EscapementPalletBeatDropLockLocking faceClearanceConcentric arcDeadbeatDrawDwellImpulse

All concepts