Machine Kinematics
solved, then drawn
Concept

Concentric arc — where it appears

An arc of a circle centred on an axis of rotation, which is the only curve a rotation about that axis carries into itself. That property is why it appears wherever a mechanism has to hold still while something else moves: a locking face, a dwell, a detent are all arcs about the axis in question.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The curves that do not move. A rotation about a point carries a curve into itself if and only if the curve is an arc of a circle centred on that point, and that one sentence is every exact dwell on this site. Each bar is how far a curve moves when it is turned two degrees about the axis its mechanism turns about, as a fraction of its own radius. The two arcs about their own centres — a cam's dwell and a deadbeat's locking face — sit at the sampling floor, which is the sagitta of the polyline they are measured as and not a property of the geometry; the number is quoted with the floor beside it because an agreement quoted without its resolution is a mistake this site has already made once. Everything else is orders of magnitude above it, including the near-circular stretch of a coupler curve that a six-bar builds its approximate dwell out of.

The arc that is concentric with the pivot

A rotation carries a curve into itself exactly when the curve is an arc of a circle about the centre of rotation. Every exact dwell on this site is that one sentence applied — a cam's dwell, a Geneva's locking disc, a deadbeat escapement's locking face — and the six-bar dwell that is merely very good is what happens when the curve is nearly one.

timing · Intermittent How far back the wheel is pushed. Recoil against the part of the pendulum's swing that happens after the tooth has landed. The arc cut concentric with the pallet arbor is the flat line on zero, and it is zero as a matter of arithmetic rather than of smallness: rotation about the arbor carries that arc into itself, so the tooth's resting place does not move and every sampled value is the same double. Every other face rises. The flat face with no draw at all is the interesting one — it starts at zero and curves, because it agrees with the arc to first order and not to second, which is precisely the amplitude sensitivity a deadbeat exists to remove.

The wheel that goes backwards

While a pendulum finishes its swing the escape wheel is doing something, and what it does is decided entirely by the shape of the face the tooth is resting on. An arc about the pallet arbor sends it nowhere — not nearly nowhere, the same double at every sample. A flat cut tangent to that arc is dead at exactly one point of itself, and it is the one point the tooth never rests on.

timing · Intermittent

Named alongside it

The objects these essays reach for when they reach for this one.

DeadbeatEscapementLocking faceBase circleCamCircular arcCoupler curveDrawDwellEscape wheelthe Geneva mechanismIntermittent motion

All concepts