Machine Kinematics
solved, then drawn
Concept

Wheel train — where it appears

The chain of meshing wheels between a clock's power source and its escapement, chosen so a required proportion is exact in integers. Its ratios are chosen by integer search rather than by rounding, because a clock's error accumulates and a proportion that is nearly right is a clock that is steadily wrong.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

404 ways to gear 60 to 1. Each dot is a pair of wheels and a pair of pinions whose ratios multiply to exactly 60, with wheels of 40 to 120 teeth and pinions of 6 to 16 leaves. The line is the hyperbola every exact answer must lie on; the dots are the ones that lie on it at whole numbers of teeth, and there are 404 of them. In a single pair there are 0 — a ratio of sixty needs a wheel of 360 teeth against a pinion of six, and nobody cuts that. Exactness is decided in integers here and never by comparing floating-point ratios, which is the one way a search like this quietly returns answers that are merely close.

A clock is a factorisation

A going train's job is a ratio and its parts are tooth counts, so whether a clock can be built is whether a number factorises inside the counts a wheel-cutting engine will cut. Sixty has 404 answers in two pairs and none at all in one. The ratio between a sidereal day and a mean one has none in any number of pairs, and the best two-pair train is out by a sixth of a second a day.

gears · Tooth Which teeth one tooth ever meets: 20 on 40. Follow one tooth of the pinion round and mark every wheel tooth it touches. It does not touch them all. It touches 2 of 40, which is z₂ divided by the greatest common divisor of the two counts — 20 here — and it goes on touching the same ones for as long as the gears are in mesh. The pattern repeats after 2 turns of the pinion. Adding one tooth to the pinion makes the counts coprime and takes the count from 2 to 40. The marks are produced by walking the mesh, and the count they give is compared with the gcd rather than derived from it.

Which tooth meets which

A tooth on a pinion does not meet every tooth on its wheel. It meets z₂ divided by the greatest common divisor of the two counts, and it meets the same ones for the whole life of the drive. On the default planetary used throughout — sun 24, planets 24 — a planet tooth touches exactly one sun tooth and never touches another, and nothing in the drawing says so.

gears · Tooth Reverted trains of 12 : 1. A reverted train has its input and output shafts in line, which means the two stages share one centre distance — so the tooth counts must satisfy z₁ + z₂ = z₃ + z₄ and give the ratio asked for. Two equations in four integers, and there is no reason for a solution to exist. For 12 : 1 there is none at all until the wheels are allowed to reach 63 teeth; below that the coaxial condition and the ratio simply cannot both be met. This is the same kind of arithmetic as the clock trains of the timing field, with one extra equation, and the extra equation is what a shaft position costs.

Two shafts that must be in line

Asking a two-stage gear train for a ratio is easy. Asking it for a ratio and for its input and output shafts to be coaxial is asking for a solution of two equations in four integers, and there is no reason for one to exist. A twelve-to-one reverted train needs a sixty-three-tooth wheel before it has any solution at all — while sixteen to one, a larger ratio, manages with fifty-six.

transmission · Transmission

Named alongside it

The objects these essays reach for when they reach for this one.

Gear trainVelocity ratioDesign ruleEnumerationApproximationBeatCentre distanceDiophantineEscapementExact arithmeticFactorisationHunting tooth

All concepts