Machine Kinematics
solved, then drawn
Concept

Eccentric — where it appears

A round body turning about an axis that is not its centre, which a strand feels as an arm varying once per revolution. It is indistinguishable from a shaped body built to a first-harmonic demand, so an assembly error and a designed variable-ratio drive produce the same drive.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The shape is what the demanded arm implies. A strand leaving a convex body runs along a tangent, so the only thing about the body the strand can feel is the perpendicular distance from the axis to that tangent — the shape's support function h(ψ). Ask for a rate and you have asked for h, because turning the body by dψ pays out h dψ; the shape then comes back from h with no solve at all, as h(ψ)û + h′(ψ)û⊥. This one was asked for h₀(1 + 0.3 cos 2ψ) with h₀ = 34 mm. The strand drawn here leaves the axis at a perpendicular distance of 24.1286 mm, which is what the demand asks for at this angle. positioned by solving, not by drawing.

The drum that is not round

The only thing about a body a strand can feel is the perpendicular distance from the axis to the tangent it leaves along. Ask for a rate and you have asked for that distance at every angle — and the shape comes back from it with no solve at all, unless the demand exceeds 1/(n²−1), at which point there is no shape.

strands · Strand One tendon over two joints. A two-link chain with a strand anchored off to the left, running over an idler at each joint and terminating on the far link. Each idler is centred on its joint's axis, which is the one arrangement that makes the strand's length a linear function of the joint angles: the coupling measured here is 14.000000 and 10.000000 mm per radian, against radii of 14 and 10. Total strand 232.845 mm. positioned by solving, not by drawing.

One strand over many joints

Route a tendon over an idler centred on a joint's axis and the strand's length becomes an exactly linear function of the joint angle — 8·10⁻¹⁴ mm of departure over 203 degrees of travel. Move that idler 6 mm off the axis and the same drive's arm swings from 8.00 to 16.52 mm per radian.

strands · Strand

Named alongside it

The objects these essays reach for when they reach for this one.

Design ruleLever armStrandApproximationConvexityEnvelopeHomotopy classIdlerSerial chainSupport functionTangencyTendon

All concepts