Machine Kinematics
solved, then drawn
Concept

Tangency — where it appears

The point at which a strand leaves the body it has been lying on, where the straight run meets the surface at a right angle. It is not an assumption about strands but a consequence of being shortest: a path that met the surface at any other angle would have a corner, and a corner can be cut.

Named by 8 essays across 2 fields — each of them below, with the objects they name alongside it.

One routine, six strand systems. Every row is the same function: a list of bodies, each with a sense, handed to a routine that returns the tangent runs between them, the arcs on them, and the total. Nothing in it knows what a belt is, what a tackle is or what a tendon is. The right-hand column is what each row was checked against — a textbook formula, an integer, a convex hull's perimeter, a second route to the same length — and it is the reason the middle column can stay the same all the way down. positioned by solving, not by drawing.

A member with no length of its own

Every link of a pin-jointed machine holds two points at a distance, in both directions, and a configuration is the root of an equation. A belt, a rope and a tendon do neither: a strand's path is decided by the bodies it touches, and its constraint is an inequality that does nothing at all until it is taut.

strands · Strand Four tangents, and the two signs that choose between them. Two circles admit four common tangents, and a strand takes whichever one its two wrap senses name. Same sense at both ends — both centres on the same side of the strand — gives the two outer tangents, each 169.0444 mm long. Opposite senses give the two that cross between the circles, each 154.9193 mm. There is no search and no case analysis anywhere in this: the run's length is √(D² − Δ²) with Δ the signed radius difference, and changing one sense changes Δ from -18 to 70. positioned by solving, not by drawing.

Where a strand leaves a body

A taut strand meets the surface it lies on at a right angle, and every book draws it that way. It is not a rule about strands: it is what being shortest looks like, and a family of paths that were never told about tangency has its minimum exactly there — 200.64346 mm against the construction's 200.64346.

strands · Strand What the wraps add up to, and what decides it. Four runs this field draws, with every wrap angle signed by the way the strand goes round its body. The right-hand column is their sum divided by a full turn, and it is a whole number every time — the turning number of a closed plane curve, arrived at by adding up a handful of angles that were computed one at a time from tangent lines. It is 1 for a loop that goes round its pulleys once and 0 for a crossed belt, whose two wraps are equal and opposite whatever the two radii are. The serpentine's idler contributes -25.3°, and the total is still exactly one turn: a tensioner lengthens the path without changing what the path is.

The wraps add up to a turn

Every wrap angle in a closed run is computed on its own, from a pair of tangent lines that knows nothing about the others. Signed by which way the strand goes round, they add to exactly one turn — or to exactly nothing, for a crossed belt — and the integer is decided by the route rather than by any of the geometry.

strands · Strand The shape is what the demanded arm implies. A strand leaving a convex body runs along a tangent, so the only thing about the body the strand can feel is the perpendicular distance from the axis to that tangent — the shape's support function h(ψ). Ask for a rate and you have asked for h, because turning the body by dψ pays out h dψ; the shape then comes back from h with no solve at all, as h(ψ)û + h′(ψ)û⊥. This one was asked for h₀(1 + 0.3 cos 2ψ) with h₀ = 34 mm. The strand drawn here leaves the axis at a perpendicular distance of 24.1286 mm, which is what the demand asks for at this angle. positioned by solving, not by drawing.

The drum that is not round

The only thing about a body a strand can feel is the perpendicular distance from the axis to the tangent it leaves along. Ask for a rate and you have asked for that distance at every angle — and the shape comes back from it with no solve at all, unless the demand exceeds 1/(n²−1), at which point there is no shape.

strands · Strand Two taut paths, and no way between them. A strand from one point to another past a peg. Each side gives a path that is taut — straight where it can be, on the surface where it must be, leaving at a right angle — and each is the shortest path on its own side: 219.165 mm on one and 200.643 mm on the other, against 200 mm of open air the strand cannot use. Neither can turn into the other without passing through the peg, which is a different kind of non-uniqueness from the assembly branches of a linkage: those are separate roots of one equation, and these are separate classes of one minimisation. positioned by solving, not by drawing.

The taut path has more than one answer

A strand from one point to another past a peg has two taut paths — 200.643 mm on one side and 219.165 on the other, against 200 mm of open air it cannot use. Both are shortest. Neither can become the other without passing through the peg, and no computation recovers which one was threaded.

strands · Strand A tooth flank is the end of an unwound strand. A strand wrapped on a circle of radius 45.105 mm, unwound while kept taut. Its free end traces the involute — the same curve the gears field builds from its own parameterisation, agreeing to 1.5e-14 mm over the whole flank. The strand is the important part of that sentence and not the curve: the taut portion is a tangent to the base circle, its length is the arc it has left, and both of those are statements about a strand rather than about a tooth. At this position the free length is 27.965 mm. positioned by solving, not by drawing.

A tooth flank is an unwound strand

Unwind a taut string from a circle and its free end traces the involute, to 1.5·10⁻¹⁴ mm of the curve the gears field draws. That is not a curiosity: the line of action of an involute pair is a crossed strand on the two base circles, so the property the involute is chosen for — a ratio that does not care where the shafts are — is a belt's property rather than a curve's.

gears · Tooth 4 turns, and none of them in a plane. A strand wrapped 4 times round a drum of radius 50 whose barrel has room for 8, with each turn lying beside the last — so the pitch is the strand's own diameter, 10 here, and the path is a helix rather than a circle. The helix angle is 1.823°, the length per turn is 314.318 against the planar model's 314.159, and the whole run is 1257.27 long where a plane would have said 1256.64. The plan view is a planar wrap exactly: projected onto the plane perpendicular to the axis, the helix is a circle of the drum's own radius to 2.8e-14 traversed 4.000000 times.

The wrap that walks along the axis

Every figure in this field is drawn in a plane, and a strand that goes round twice cannot be: the second turn has to lie beside the first. The plan view of the helix that results is a planar wrap exactly — so every wrap angle survives and the length does not, by five hundred parts per million on a real rope.

strands · Strand An inner cable in its sheath, pulled and pushed. A sheath routed through two bends — the first turning 90° on a radius of 70, the second turning back 90° on 55 — drawn with its bore exaggerated to a clearance of 7 so the inner's two positions can be seen. Pulled, the inner is taut and takes the shortest path the tube allows, hugging the inside of each bend; pushed, it is pressed against the outside. Both paths are strands over pulleys of radius R ∓ c at the bend centres. At this clearance the pulled inner is 20.53 shorter than the centreline and the pushed one 23.63 longer, against c times the total turning, 21.99. At a real clearance of 0.25 the pulled inner is short by 0.7834 against 0.7854. Dragging changes the first bend's angle.

A strand in a tube

A Bowden cable's inner runs inside a sheath with a little clearance, and pulled it takes the shortest path the tube allows — a strand over pulleys of radius R − c at every bend. So its lost motion is the clearance times the total angle the sheath turns through: no bend radius in it, no route shape, and the S-bend that turns nowhere net loses as much as the U that turns back. Steering a handlebar changes it by exactly c times the change in angle.

strands · Strand

Named alongside it

The objects these essays reach for when they reach for this one.

StrandDesign ruleTurning numberWrap angleApproximationBelt driveConvex hullTautIdlerInextensibleLever armShortest path

All concepts