Machine Kinematics
solved, then drawn
Concept

Cuspidal mechanism — where it appears

A parallel mechanism that can change assembly mode without crossing a direct singularity. It does so by driving its actuators round a cusp of the singular set, which needs at least three assembly modes, so a planar five-bar can never be one.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

Where the assembly count changes, and a loop round a cusp. With the first motor held at 216°, each point of the square is a setting of the second and third motors, shaded by how many assemblies the platform has there, sampled on a 41 by 41 grid: 2 assemblies at 1,261, 4 assemblies at 347, 6 assemblies at 73. Each edge between two shades is a curve of direct singularities, where two assemblies merge and vanish, and two such edges meet in a sharp point. The 2 marked points are the cusps in this window, each found as a triple root of the closure equation. The dashed circle, of radius 8°, is the loop the motors are driven round; it encloses 1 cusp, the one at (101.35°, 185.32°), and starts at the open marker.

Round a cusp into another assembly

A parallel platform's assembly mode was supposed to change only through a direct singularity. Driven round a small loop of motor angles that encloses a cusp of the singular curve, the standard three-legged platform leaves one assembly and arrives in another, turned 52° from where it started, and at no point on the way is it nearer than 0.0716 to singular.

parallel · Parallel Two motors, two circles, two places for the hand. A planar five-bar with its motors 1.0 apart, arms 1 and distal links 1.25, at motor angles 100° and 60°. Each distal link holds the hand on a circle of radius 1.25 about its elbow, and the elbows are 1.678 apart, less than the 2.50 at which the circles would only touch, so they meet twice. The hand drawn solid is at (0.229, 1.850) with det A 0.995; the other assembly, dashed, is at (0.098, 0.001) with det A -0.995 — the same size and the opposite sign.

The smallest parallel robot

Two motors, two arms, and two links meeting at a hand: a planar five-bar is the smallest parallel robot there is. Its forward problem is two circles, so the hand has two places to be, and each is named by the sign of one determinant. That is the whole reason it cannot do what the three-legged platform does, and cannot change assembly without passing through the one configuration where the two meet.

parallel · Parallel

Named alongside it

The objects these essays reach for when they reach for this one.

Assembly-modeDirect singularityForward kinematicsWorking modeInverse singularityParallel manipulatorParallel mechanismRoot countSingularityWorkspace

All concepts