Machine Kinematics
solved, then drawn
Concept

Working mode — where it appears

One of the postures a mechanism can hold for the same output pose, distinguished by which way its joints are bent. A machine changes between them only by passing through a singularity, so the choice is made once and lived with.

Named by 6 essays across 2 fields — each of them below, with the objects they name alongside it.

Three legs, one platform. A 3-RRR planar parallel mechanism at (0.20, -0.15) turned 11.5°, elbows up/up/up. The three actuator angles were computed one leg at a time and independently, which is what makes this direction cheap. The dashed lines extend each leg's second link: those are the three forces the legs can transmit to the platform, and the mechanism is controllable exactly while they stay independent. Here they miss one another by 0.651, and the smallest singular value of the three is 0.9550. At this position the platform can be turned through 206° in all before a leg runs out of reach.

The easy problem and the hard one change places

For a robot arm, working out where the hand is takes a walk down a chain and working out what the joints must be to put it somewhere is the hard part. Connect the platform by three legs instead of one and both statements reverse — and the reversal is not a matter of degree.

parallel · Parallel 6 ways to assemble the same three actuator angles. The actuators are at 216°, 48°, 144° in every panel, so the three elbows are at the same three points throughout and only the platform differs. Each pose satisfies all three legs to 6.7e-16. Found by reducing the problem to one equation in the platform angle and scanning it at 0.100° — exhaustive to that resolution and no further, which is the honest thing to say about a root count. Over a survey of 6750 actuator triples this mechanism ranges from none to 6.

One command, six answers

Lock the three motors of a planar platform and the platform can be in as many as six different poses, every one of them satisfying every leg exactly. Which one it is in was decided by how it was assembled and where it has been since — and the number of answers is not a property of the mechanism but of where the motors happen to be.

parallel · Parallel Where the platform stops being controllable, at 0°. Every point is a position of the platform's centre at a fixed orientation of 0°, shaded by how far it is from a direct singularity — pale is near. Unshaded means unreachable, which is the workspace boundary and the ordinary kind of singularity. The line is det A = 0, traced through the field rather than tested for: it runs through the middle of the reachable region in 102 segments, and on it the platform can move with all three actuators locked. 3312 of 6561 sampled positions are reachable.

The workspace is not a shape you choose

A serial arm's reach is roughly a sphere and can be quoted as a number. A parallel mechanism's is the intersection of three reachability conditions, changes with every degree of orientation, and has a surface of uncontrollable poses cutting through the middle of it. There is no formula. There is a map, and it has to be computed.

parallel · Parallel Where the assembly count changes, and a loop round a cusp. With the first motor held at 216°, each point of the square is a setting of the second and third motors, shaded by how many assemblies the platform has there, sampled on a 41 by 41 grid: 2 assemblies at 1,261, 4 assemblies at 347, 6 assemblies at 73. Each edge between two shades is a curve of direct singularities, where two assemblies merge and vanish, and two such edges meet in a sharp point. The 2 marked points are the cusps in this window, each found as a triple root of the closure equation. The dashed circle, of radius 8°, is the loop the motors are driven round; it encloses 1 cusp, the one at (101.35°, 185.32°), and starts at the open marker.

Round a cusp into another assembly

A parallel platform's assembly mode was supposed to change only through a direct singularity. Driven round a small loop of motor angles that encloses a cusp of the singular curve, the standard three-legged platform leaves one assembly and arrives in another, turned 52° from where it started, and at no point on the way is it nearer than 0.0716 to singular.

parallel · Parallel Two motors, two circles, two places for the hand. A planar five-bar with its motors 1.0 apart, arms 1 and distal links 1.25, at motor angles 100° and 60°. Each distal link holds the hand on a circle of radius 1.25 about its elbow, and the elbows are 1.678 apart, less than the 2.50 at which the circles would only touch, so they meet twice. The hand drawn solid is at (0.229, 1.850) with det A 0.995; the other assembly, dashed, is at (0.098, 0.001) with det A -0.995 — the same size and the opposite sign.

The smallest parallel robot

Two motors, two arms, and two links meeting at a hand: a planar five-bar is the smallest parallel robot there is. Its forward problem is two circles, so the hand has two places to be, and each is named by the sign of one determinant. That is the whole reason it cannot do what the three-legged platform does, and cannot change assembly without passing through the one configuration where the two meet.

parallel · Parallel The configuration space of a crank rocker. Every point of the square is a pair of angles — the crank's and the rocker's — and the curve is where the coupler is exactly the right length to join them. That curve is the mechanism: one equation in two angles leaves one freedom, which is the mobility. It has 2 components, and that is the two assembly branches. A built linkage cannot cross between them, because there is no path in the set to cross by — and each goes all the way round, which is what makes the crank a crank. The square's left and right edges are the same line, and so are its top and bottom.

Branches were components all along

Seven words have been used for one thing. An assembly branch, a circuit, an assembly mode, a working mode, a posture and a branch defect are all statements about the connected components of a mechanism's configuration space — and once that is said, a four-bar's two circles, a platform's six modes and a synthesis defect stop being three subjects.

serial · Algebra

Named alongside it

The objects these essays reach for when they reach for this one.

Assembly-modeDirect singularityForward kinematicsParallel mechanismSingularityPlatformRoot countWorkspaceCuspidal mechanismInverse kinematicsNewton–RaphsonAssembly branch

All concepts