Machine Kinematics
solved, then drawn
Concept

Recoil — where it appears

How far an escape wheel is driven backwards while the pendulum finishes its swing, which is zero exactly when the locking face is an arc about the pallet arbor. It is a direct measurement of whether the locking geometry is correct, since the amount by which the wheel goes backwards is set by the departure of the locking face from a concentric arc.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

How far back the wheel is pushed. Recoil against the part of the pendulum's swing that happens after the tooth has landed. The arc cut concentric with the pallet arbor is the flat line on zero, and it is zero as a matter of arithmetic rather than of smallness: rotation about the arbor carries that arc into itself, so the tooth's resting place does not move and every sampled value is the same double. Every other face rises. The flat face with no draw at all is the interesting one — it starts at zero and curves, because it agrees with the arc to first order and not to second, which is precisely the amplitude sensitivity a deadbeat exists to remove.

The wheel that goes backwards

While a pendulum finishes its swing the escape wheel is doing something, and what it does is decided entirely by the shape of the face the tooth is resting on. An arc about the pallet arbor sends it nowhere — not nearly nowhere, the same double at every sample. A flat cut tangent to that arc is dead at exactly one point of itself, and it is the one point the tooth never rests on.

timing · Intermittent One angle, read twice. Draw against the angle the locking face is tilted by. It is not a separate design quantity from recoil: the pallet's moment per unit of wheel torque is minus the rate at which the wheel is driven backwards, which is virtual work and holds to nine figures. So an escapement cannot be made to hold its own lock without also being made to push its train back — and at δ = 0 the arc has neither, which is a lock that any disturbance opens. The flat face starts above zero because the tooth rests below the corner, where a straight face is no longer tangent to anything.

The angle that holds the lock

A locking face cut exactly concentric with the pallet arbor has no tendency to hold itself: the tooth's push aims straight at the pivot and its moment is zero, so the smallest disturbance opens the lock. Tilt the face and the moment becomes ρ sin δ — and the same tilt, by virtual work, is exactly the rate at which the wheel is driven backwards. Draw and recoil are one angle read twice.

timing · Intermittent

Named alongside it

The objects these essays reach for when they reach for this one.

DeadbeatDrawEscapementLockLocking facePalletConcentric arcContact normalEscape wheelLever armStructural errorSupplementary arc

All concepts